Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

Future H5 buyers & assembly

Information and progress towards the H5 board.

Future H5 build options

Bare PCB only - no parts
2
3%
Generic SMT parts assembled (birdseed)
17
29%
Bulk parts assembled (as they are sold now)
40
68%
 
Total votes: 59

User avatar
me262
Posts: 9
Joined: Wed Apr 17, 2024 1:53 am

Re: Future H5 buyers & assembly

Post by me262 »

Reporting in from the US with a blank board.

I wanted a challenge, but I might have bitten off more than I can chew. :lol:
I'll go through the BOM and start gearing up to assemble.
Oddly I voted for birdseed. :lol:

Has anyone found any problems with these boards yet? (EDIT, Not that I'm expecting any, but if I'm putting it all together I'd like to apply fixes, if any problems pop up.)

Also wondering, if we remove the BUS IO PORTs, and remove the socket for the memory (and move to a QFP), how small could we make this puppy?
It'd be really cool to shrink this down enough that we can put it alongside a Roland MT-32 external.

:D I can see it now, the Atari Exxos MegaMini ST!
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Future H5 buyers & assembly

Post by exxos »

me262 wrote: Sun Mar 16, 2025 9:19 pm :D I can see it now, the Atari Exxos MegaMini ST!
There was such a project already.. but lack of time to do everything.....

viewtopic.php?p=47033#p47033
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Future H5 buyers & assembly

Post by exxos »

Took 2 of us to pack up the boards today. Just finished !

:dizzy:

20250410_202945.jpg
20250410_202945.jpg (277.63 KiB) Viewed 2566 times
Dead_Cat
Posts: 19
Joined: Sat Jun 08, 2024 6:43 pm
Location: Cincinnati

Re: Future H5 buyers & assembly

Post by Dead_Cat »

me262 wrote: Sun Mar 16, 2025 9:19 pm Reporting in from the US with a blank board.

I wanted a challenge, but I might have bitten off more than I can chew. :lol:
I'll go through the BOM and start gearing up to assemble.
Oddly I voted for birdseed. :lol:

Has anyone found any problems with these boards yet? (EDIT, Not that I'm expecting any, but if I'm putting it all together I'd like to apply fixes, if any problems pop up.)

Also wondering, if we remove the BUS IO PORTs, and remove the socket for the memory (and move to a QFP), how small could we make this puppy?
It'd be really cool to shrink this down enough that we can put it alongside a Roland MT-32 external.

:D I can see it now, the Atari Exxos MegaMini ST!
I'm in the same situation with the motherboard, and wound up ordering an assembled version as well. I was going to order an assembled board anyway to make it easier to assemble. I was thinking birdseed. It's actually the sourcing parts that's intimidating, I have little luck with that.

Also, I was looking at the PI based MT-32 emulator i assembled a while back, thinking it would easily fit inside the case.
MEX68KECB
Site sponsor
Site sponsor
Posts: 23
Joined: Wed Apr 05, 2023 1:40 am

Re: Future H5 buyers & assembly

Post by MEX68KECB »

Reporting from the U.S.A. with a blank board and a birdseed board. Pretty cool.
PXL_20250218_234240736.MP.jpg
PXL_20250218_234240736.MP.jpg (289.05 KiB) Viewed 2466 times
PXL_20250504_201154192.jpg
PXL_20250504_201154192.jpg (434.58 KiB) Viewed 2466 times
User avatar
exxos
Site Admin
Site Admin
Posts: 28669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Future H5 buyers & assembly

Post by exxos »

MEX68KECB wrote: Sun May 04, 2025 9:26 pm Reporting from the U.S.A. with a blank board and a birdseed board. Pretty cool.
:bravo:

Document your progress in your own blog which you can start here :)

viewforum.php?f=121
Post Reply

Return to “H5 Phoenix Platform Edition”