Lets see your install images of the ST536 (rev 5) booster! I will kick it off ...
Mine has the ACSI wire as it was a early build. There wire is not needed in the latest firmware.
https://exxosforum.co.uk/atari/last/TF536/index.htm
Feel free to post benchmarks or images of your favorite software running on it also :)
REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Post images of your ST536 install !
-
exxos
- Site Admin
- Posts: 28447
- Joined: 16 Aug 2017 23:19
- Location: UK
Post images of your ST536 install !
You do not have the required permissions to view the files attached to this post.
-
PhilC
- Moderator
- Posts: 7466
- Joined: 23 Mar 2018 20:22
Re: Post images of your ST536 install !
Here’s one in a short ST
It needs raising with sockets or headers but works great.
It needs raising with sockets or headers but works great.
You do not have the required permissions to view the files attached to this post.
If it ain't broke, test it to Destruction.
-
LarryL
- Site sponsor
- Posts: 245
- Joined: 20 Nov 2022 14:42
- Location: Germany
Re: Post images of your ST536 install !
And here is one in a Mega ST, together with a ET4000 in a STGA adapter
Not visible: CPU relocator (from the Exxos store) and a Lightning ST underneath
Not visible: CPU relocator (from the Exxos store) and a Lightning ST underneath
You do not have the required permissions to view the files attached to this post.
-
flegmatik
- Posts: 15
- Joined: 04 Jan 2021 16:51
- Location: Ljubljana
Re: Post images of your ST536 install !
Revision 5 in H5
You do not have the required permissions to view the files attached to this post.
-
spen
- Site sponsor
- Posts: 24
- Joined: 01 Jan 2022 16:38
Re: Post images of your ST536 install !
ST536R5 in a Mega4.
Work in progress, it ran yaartt for 24 hours without error once I put the fan next to it. Without the fan it overheats within half an hour then on reboot it becomes very flaky until it's cooled.
Work in progress, it ran yaartt for 24 hours without error once I put the fan next to it. Without the fan it overheats within half an hour then on reboot it becomes very flaky until it's cooled.
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: ClaudeBot and 0 guests