Icky - Progress

[exxos]

OK. This is what I have been using to help me decipher. Its based on me looking down onto the board and how you have your layout pics.

ah, so the 3 left pins on my pcb are even wrong then :(

[exxos]

OLD vs FIXED..

For example pin 12 & 4 are swapped.....

Capture.JPG

[exxos]

OK its got confusing... but using 6,7,8 as right direction.. I think you drew the middle pins offset the wrong way.. should be like this...

.. so then it should match the pcb pins/layout..

22222222.png

[Icky]

I'd buy one off you as I hate soldering those monitor plugs.

Me to, I hate cables. No chance of me building them..

Yes and I hated doing the soldering on them too but it was only three wires to swap around on my cable.

Here it is we have proper video :yay2:

[exxos]

Here it is we have proper video :yay2:

:cheer: :cheer: :cheer: :cheer:

Awesome demo you running there as well! :lol:

[PhilC]

Awesome demo you running there as well! :lol:

Yeah that's what I was thinking, cool gfx.

[Icky]

Yeah that's what I was thinking, cool gfx.

Yes that’s an interesting pattern I have never seen on an ST. It happens on every power on and reset.

[exxos]

Yes that’s an interesting pattern I have never seen on an ST. It happens on every power on and reset.

Can you try diagrom ? Can post you a chip if needs be..

[Icky]

Can you try diagrom ? Can post you a chip if needs be..

That is my next item. I have a spare rom chip from your store already. Thought I would reprogram with DiagROM - any pointers?

Tasks for today:

• Put DiagROM on ROM chip
• Hunt for USB to Serial Cable - I have one somewhere
• Most likely my USB to Serial Cable is 9pin D-SUB so will have to build an adaptor to the STF Serial port.

[exxos]

That is my next item. I have a spare rom chip from your store already. Thought I would reprogram with DiagROM - any pointers?

Yeah, you can't reprogram the ROM's from my store :P