No problem, we'll wait. Get well. And the sooner the better :)Icky wrote: 26 Jun 2024 10:28 But mostly I need to get back on top of things to start the ball rolling again.
Project: HDMI/DVI out for STFM
-
ijor
- Posts: 861
- Joined: 30 Nov 2018 20:45
Re: Project: HDMI/DVI out for STFM
http://github.com/ijor/fx68k 68000 cycle exact FPGA core
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com
-
Icky
- Site Admin

- Posts: 4451
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Project: HDMI/DVI out for STFM
Created a SHIFTER Test board to test the FPGA is functioning correctly on the Phoenix Shifter. Similar to one for the MMU and BLUE boards - https://www.exxosforum.co.uk/forum/view ... 10#p134258
-
Icky
- Site Admin

- Posts: 4451
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Project: HDMI/DVI out for STFM
Its been long time coming and it had its preview at Cyber Legends 5 - Here is the Phoenix Shifter v5 TANG Edition
Well things have turned around a bit. I started looking at what was wrong with several things about the Phoenix Shifter. Firstly I couldn't understand why the shifter only worked on some monitors / TVs this turned out to be we were driving everything from the 32MHz line and attempting to provide a crude resolution out to the HDMI port. Also Closure was still having issues running for various reasons.
So I started to think how do we go about fixing the Phoenix Shifter to not be constrained to the 32MHz but be able to always represent the ST screen at a resolution of say 720p as most monitors / tv's support this. Then there is no need for figuring out if a TV or monitor will work for the Phoenix Shifter.
So my plan was provide the native screen then use a frame buffer and let that using circuitry like the ADV7513 create the 720p output from its clock. I started to redesign the Phoenix Shifter as v5.0 and things started to get away from me as I figured out more and more how I could create a better product. I ended up with all these features I wanted to do and so many questions on whether it would work. There would be a lot riding on the new board in terms of costs and unknowns. Because of this I ended up going down two routes.
TANG 20K onto of the PhoenixShifter v5.0 TANG Edition board - plug straight into the Shifter socket
TANG 20K onto of the PhoenixShifter v5.0 TANG Edition board underside
Phoenix Panel showing Phoenix E-Boards installed
Firmware Update Demo
I will post some more info on this soon including Closure run.
Well things have turned around a bit. I started looking at what was wrong with several things about the Phoenix Shifter. Firstly I couldn't understand why the shifter only worked on some monitors / TVs this turned out to be we were driving everything from the 32MHz line and attempting to provide a crude resolution out to the HDMI port. Also Closure was still having issues running for various reasons.
So I started to think how do we go about fixing the Phoenix Shifter to not be constrained to the 32MHz but be able to always represent the ST screen at a resolution of say 720p as most monitors / tv's support this. Then there is no need for figuring out if a TV or monitor will work for the Phoenix Shifter.
So my plan was provide the native screen then use a frame buffer and let that using circuitry like the ADV7513 create the 720p output from its clock. I started to redesign the Phoenix Shifter as v5.0 and things started to get away from me as I figured out more and more how I could create a better product. I ended up with all these features I wanted to do and so many questions on whether it would work. There would be a lot riding on the new board in terms of costs and unknowns. Because of this I ended up going down two routes.
- Continue to see what could be fixed on the v2 Phoenix Shifter to close out the original Shifter Core and make sure it was adhering to the original
- Design out the v5 using the Max10 but because of costs I ended up looking at a TANG 20K board that I already had.
- Be the same footprint as the original shifter chip (well it is as near as it can be) - so can be used on any ST :)
- Provide a 720p @ 60Hz output over HDMI
- Switching to Mono display or Medium etc without any TOS patching
- Video Effects and sizing
- Provide a codec to mix the Sts YM sound and a MIDI board like the S2 together and out through the HDMI
- User firmware upgradeable from the SD card in the TANG, has fall back golden source which replaces any firmware if it bricks
- A Phoenix Eco System Panel to control the Shifter including firmware upgrade and other Phoenix board functions.
- Splash screen on boot and info overlay - can be turned off
TANG 20K onto of the PhoenixShifter v5.0 TANG Edition board - plug straight into the Shifter socket
TANG 20K onto of the PhoenixShifter v5.0 TANG Edition board underside
Phoenix Panel showing Phoenix E-Boards installed
Firmware Update Demo
I will post some more info on this soon including Closure run.
-
Cyprian
- Posts: 573
- Joined: 22 Dec 2017 09:16
- Location: Warszawa, Poland
Re: Project: HDMI/DVI out for STFM
cool
btw, I see that pixels are stretched differently, e.g. letter "i" in "File" vs "View". Is it a grabber issue, or something else?
Atari: V4sa TT030 Falcon030 Mega ST Mega STe 1040 STe 520 STm 800XL 65XE Jaguar Lynx I/II 7800 Portfolio / VME: ATW800/2 Mach64 Mach32 ET4000 CrazyDots PAMNet / SM146 SC1435 SM124 / Antonia2 ATSpeedC16 TF536 PAK68/3
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
-
Icky
- Site Admin

- Posts: 4451
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Project: HDMI/DVI out for STFM
Yeah it’s the scaler option I am using there are several options that scale in different ways.Cyprian wrote: 21 Oct 2026 21:29 btw, I see that pixels are stretched differently, e.g. letter "i" in "File" vs "View". Is it a grabber issue, or something else?
Of course a Med Res is 640x200 and scaling to 720p there are many ways you can do that. For example the Integer option is 1:1 so smaller on the screen but a pixel to pixel mapping. I'll do a write up and show all the options.
-
mv2112
- Posts: 2
- Joined: 21 Jan 2026 22:32
Re: Project: HDMI/DVI out for STFM
Even while only understanding half of this and loosely following the FPGA and Phoenix work this seems like a thing of beauty.
-
Cyprian
- Posts: 573
- Joined: 22 Dec 2017 09:16
- Location: Warszawa, Poland
Re: Project: HDMI/DVI out for STFM
it sounds greatIcky wrote: 21 Oct 2026 21:37Yeah it’s the scaler option I am using there are several options that scale in different ways.Cyprian wrote: 21 Oct 2026 21:29 btw, I see that pixels are stretched differently, e.g. letter "i" in "File" vs "View". Is it a grabber issue, or something else?
Of course a Med Res is 640x200 and scaling to 720p there are many ways you can do that. For example the Integer option is 1:1 so smaller on the screen but a pixel to pixel mapping. I'll do a write up and show all the options.
Atari: V4sa TT030 Falcon030 Mega ST Mega STe 1040 STe 520 STm 800XL 65XE Jaguar Lynx I/II 7800 Portfolio / VME: ATW800/2 Mach64 Mach32 ET4000 CrazyDots PAMNet / SM146 SC1435 SM124 / Antonia2 ATSpeedC16 TF536 PAK68/3
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
Megafile30 Atari1050 DDDHDD XCA12 SF314 / AVGCART SUBCART SidecarTridge ACSI2STM FujiNet LynxMultiCard SkunkBoard CosmosEx SatanDisk UltraSatan USBFloppyDriveEmulator SDrive SIO2PC Eiffel
http://260ste.atari.org
-
Icky
- Site Admin

- Posts: 4451
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Project: HDMI/DVI out for STFM
The Phoenix Shifter v5.0 TANG Edition is a clean simple upgrade for anyone looking to replace their Shifter chip with an HDMI solution.
All that is required is a TANG 20K FPGA Board around £34 and one of our Phoenix Shifter v5.0 TANG Edition boards. These two combined then plugs into the shifter socket and there are a few fly leads required to connect to ST / H5 board:
All that is required is a TANG 20K FPGA Board around £34 and one of our Phoenix Shifter v5.0 TANG Edition boards. These two combined then plugs into the shifter socket and there are a few fly leads required to connect to ST / H5 board:
- the MONO Detect line which goes to the MFP chip GPIP7 pin
- the VSYNC line
-
PhilC
- Moderator

- Posts: 7744
- Joined: 23 Mar 2018 20:22
Re: Project: HDMI/DVI out for STFM
Presuming I got the right version, I've managed to get a tang nano 20k for just over £28.
So please do add me to the list of bets testers,
So please do add me to the list of bets testers,
If it ain't broke, test it to Destruction.
Who is online
Users browsing this forum: ClaudeBot and 0 guests