Project: HDMI/DVI out for STFM

Progress on our FPGA cores.
User avatar
Smonson
Posts: 720
Joined: 28 Oct 2017 10:21
Location: Canberra, Australia

Re: Project: HDMI/DVI out for STFM

Post by Smonson »

That's fancy, I just use my fingers :lol:
User avatar
exxos
Site Admin
Site Admin
Posts: 29818
Joined: 16 Aug 2017 23:19
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by exxos »

Smonson wrote: 19 Mar 2019 11:32 That's fancy, I just use my fingers :lol:
Yeah me to firstly :lol:
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15600
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Project: HDMI/DVI out for STFM

Post by rubber_jonnie »

I'm a visual person, so the video was the best way for me to show you all what I meant.

As for the socket, it is not turned pin, but a cheap one which was already fitted to the board when I got it, and I don't think I have a machined one spare. In fact I think my machines that do have a socketed shifter are all the cheap type socket. It's just the way they came.

In terms of putting a scope on it, that is feasible and would be a good test of my USB scope, though I would need some guidance as to what I'm looking for and a procedure to follow.

Would it be feasible to power the mod board using the floppy power connector? At least just for testing purposes, as the machine at present is a bare board with no floppy.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
exxos
Site Admin
Site Admin
Posts: 29818
Joined: 16 Aug 2017 23:19
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by exxos »

The scope is just to load pins.. You could (and probably better) use a small pF cap, something like 47pF on a fly lead with one end soldered to 0V. Then just go over each pin on the shifter one by one, and see if the video improves (becomes more stable when the 47pF is on any particular pin).

The scope does the same, but is only normally around 5-10pF.. Usually that's enough but sometimes its not.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15600
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Project: HDMI/DVI out for STFM

Post by rubber_jonnie »

exxos wrote: 19 Mar 2019 12:47 The scope is just to load pins.. You could (and probably better) use a small pF cap, something like 47pF on a fly lead with one end soldered to 0V. Then just go over each pin on the shifter one by one, and see if the video improves (becomes more stable when the 47pF is on any particular pin).

The scope does the same, but is only normally around 5-10pF.. Usually that's enough but sometimes its not.
Roger that!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Icky
Site Admin
Site Admin
Posts: 4451
Joined: 03 Sep 2017 10:57
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by Icky »

Just to confirm have tried the same on the ST Remake as this is the only one I have a blitter in.

Without vsync and blitter enabled I can not reproduce your behaviour RJ. The boards are working ok.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15600
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Project: HDMI/DVI out for STFM

Post by rubber_jonnie »

Icky wrote: 19 Mar 2019 21:40 Just to confirm have tried the same on the ST Remake as this is the only one I have a blitter in.

Without vsync and blitter enabled I can not reproduce your behaviour RJ. The boards are working ok.
All the more reason for me to try some other boards I think.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Icky
Site Admin
Site Admin
Posts: 4451
Joined: 03 Sep 2017 10:57
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by Icky »

rubber_jonnie wrote: 20 Mar 2019 10:17
Icky wrote: 19 Mar 2019 21:40 Just to confirm have tried the same on the ST Remake as this is the only one I have a blitter in.

Without vsync and blitter enabled I can not reproduce your behaviour RJ. The boards are working ok.
All the more reason for me to try some other boards I think.
Yeah these machines are like trying to keep an old Ford Escort on the road. You never know what part is going to break every time you turn over the key.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15600
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Project: HDMI/DVI out for STFM

Post by rubber_jonnie »

Icky wrote: 20 Mar 2019 10:27
Yeah these machines are like trying to keep an old Ford Escort on the road. You never know what part is going to break every time you turn over the key.
You're not wrong!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15600
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Project: HDMI/DVI out for STFM

Post by rubber_jonnie »

Super quick update, I popped the original Shifter back in and re-ran the quick blitter test from the diag cartridge and it passed OK.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...

Return to “FPGA DEVELOPMENT”

Who is online

Users browsing this forum: ClaudeBot and 1 guest