Project: HDMI/DVI out for STFM

Progress on our FPGA cores.
User avatar
Smonson
Posts: 720
Joined: 28 Oct 2017 10:21
Location: Canberra, Australia

Re: Project: HDMI/DVI out for STFM

Post by Smonson »

I can, but not until tomorrow arvo so about 30 hours away... In the meantime here's where I connected it on mine:

IMAG0177.jpg
IMAG0177.jpg (536.75 KiB) Viewed 4022 times
troed
Posts: 936
Joined: 21 Aug 2017 22:27

Re: Project: HDMI/DVI out for STFM

Post by troed »

Here's mine. Bigger pad. Less risk of ripping out a trace when I'm moving the FPGA around ;)

IMG_20180831_084445_0382.JPG
IMG_20180831_084445_0382.JPG (227.05 KiB) Viewed 4725 times
User avatar
exxos
Site Admin
Site Admin
Posts: 29818
Joined: 16 Aug 2017 23:19
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by exxos »

troed wrote: 31 Aug 2018 08:59 Here's mine. Bigger pad. Less risk of ripping out a trace when I'm moving the FPGA around ;)
Should be same line as me then...

I'm on pin 4...
1.JPG
1.JPG (70.19 KiB) Viewed 4723 times
User avatar
Smonson
Posts: 720
Joined: 28 Oct 2017 10:21
Location: Canberra, Australia

Re: Project: HDMI/DVI out for STFM

Post by Smonson »

Looks good to me. Do you have your USB Blaster ready to go? I'll see if I can whip up a video test.
User avatar
exxos
Site Admin
Site Admin
Posts: 29818
Joined: 16 Aug 2017 23:19
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by exxos »

Smonson wrote: 31 Aug 2018 09:50 Looks good to me. Do you have your USB Blaster ready to go? I'll see if I can whip up a video test.
*somewhere* in a drawer...gosh I couldn't even tell you what software programs the thing, is it in Quartus ? really can't remember :roll:
User avatar
Smonson
Posts: 720
Joined: 28 Oct 2017 10:21
Location: Canberra, Australia

Re: Project: HDMI/DVI out for STFM

Post by Smonson »

Yep, Quartus :D
I've only used Quartus-II (version 13) so I can't tell you whether any later versions will also work.
User avatar
exxos
Site Admin
Site Admin
Posts: 29818
Joined: 16 Aug 2017 23:19
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by exxos »

Smonson wrote: 31 Aug 2018 10:14 Yep, Quartus :D
I've only used Quartus-II (version 13) so I can't tell you whether any later versions will also work.
I've got 17 & 13 installed :)
User avatar
Smonson
Posts: 720
Joined: 28 Oct 2017 10:21
Location: Canberra, Australia

Re: Project: HDMI/DVI out for STFM

Post by Smonson »

If you load this file in (use JTAG mode), it'll attempt to display a diagnostic picture at 50Hz.

http://smonson.com/unmanaged/atari/hdmi ... -vsync.sof

Red screen with blue and white vertical bars: no vsync
Green screen possibly with one red horizontal bar: vsync
User avatar
exxos
Site Admin
Site Admin
Posts: 29818
Joined: 16 Aug 2017 23:19
Location: UK

Re: Project: HDMI/DVI out for STFM

Post by exxos »

Thanks.. will give it a try later, have to go out shortly :(
User avatar
Smonson
Posts: 720
Joined: 28 Oct 2017 10:21
Location: Canberra, Australia

Re: Project: HDMI/DVI out for STFM

Post by Smonson »

No worries! I hope it's nothing serious, my track record so far isn't looking good otherwise :lol:

You can also read vsync off the following 3 pins arrowed in blue.

vsync-pins.png
vsync-pins.png (48.81 KiB) Viewed 4941 times

Return to “FPGA DEVELOPMENT”

Who is online

Users browsing this forum: ClaudeBot and 0 guests