TF1260 Testing FW

[supaduper]

For consistency I would stick to the seqential serial for practicality so mine would be 1001 :D

I was thinking something more childish like 68090

Actually I like it Steve, proving that us retro guys have a humour bone 8-)

[matt020]

I'm hoping to do a STABLE release package for this next week.

Will it be any different to iteration 3? Flashing my 1260 with a RasperryPi is a pain in the ass with the dupont cable.

[terriblefire]

I'm hoping to do a STABLE release package for this next week.

Will it be any different to iteration 3? Flashing my 1260 with a RasperryPi is a pain in the ass with the dupont cable.

Not planning any more changes. Just to formalize the package and put some release notes in there.

[ziosante]

Tested today iteration 3, no issues at the moment
I'll continue testing
A1200 dev 1D.1 booting from internal IDE, 3.2.1 ROM

Thanks for the update

P.S.:
Debain 3.1r8 works
Netbsd 9.3 works

[idc]

I was thinking something more childish like 68090

Actually I like it Steve, proving that us retro guys have a humour bone 8-)

68069 :mrgreen:

[matt020]

Could I please confirm that the serial number for iteration 3 is 1000 again?

[terriblefire]

Could I please confirm that the serial number for iteration 3 is 1000 again?

probably is. Unless i specify the serial number when i type make its 1000.

[idc]

Yes, it is 1000.

[matt020]

Thank you for confirming.
And thank you Stephen for the update. I know I'm not alone when I say I appreciate and admire your work. Thank you.

[astuermer]

Flashed my TF1260 with the Raspberry method and version 3 of the firmware.
Raspberry Pi Zero 2W, was kinda slow but it worked on first try.

1D1 board with 3.2.2.1 ROMs here.
I am using internal IDE, CPU is a Rev 5.
With latest v1000 I had stable 50 and 67.
75 freezed immediately, 80 sometimes worked sometimes freezed immediately.
All between freezes and above 80 I never tried - I only have a cooler with a 12V fan so I am not sure it will be safe enough.

Currently testing some demos @ 66.65 (67 setting).

• 50 is stable as ever
• 58,33 (59) freezes immediately after opening a window
• 60 (61) same...
• 62,5 (63) same...
• 66,65 (67) stable as before (currently running Quake demo)
• 75 (75) freezes...
• 80 (80) freezes...

I tested every game and demo which I had experienced issues with previous FW, and they all work flawlessly now.

Which games and demos did you have problems with?