REV 3 - REV 5 - The beginning (ST536)

[exxos]

@frank.lukas TOS206 an TF536 works fine on its own.. it malfunctions when using MAPROM...

[exxos]

Got distracted with the ROM decoding https://www.exxosforum.co.uk/forum/view ... =20#p60413

But follow the red wire and the TF536 is now providing the ROM decoding output for the H4..

IMG_6324.JPG (371.61 KiB) Viewed 4534 times

I guess I really need to solder a ROM socket on the TF536 to make sure it works as intended next @PhilC can try it

[PhilC]

I just love the way you're supporting your scope

[exxos]

I just love the way you're supporting your scope

I know!! is only free real estate I have left

I am really wondering how long it will take for the toroidal transformer to wipe the floppy as well

[exxos]

So with some kind help from @Badwolf With the Verilog code.... I am now running this at 50Mhz! scores overall are fractionally slower than my 68000 50MHz booster, but that is likely as I cannot coax anymore speed out of the ROM like I could the ST.


TF536 50MHz..

IMG_6333.JPG (410.22 KiB) Viewed 4309 times

68000 50Mhz.

20650.jpg (93.04 KiB) Viewed 4309 times

Next to get TT RAM working...

[JezC]

Looking very promising

[Badwolf]

So with some kind help from @Badwolf With the Verilog code.... I am now running this at 50Mhz! scores overall are fractionally slower than my 68000 50MHz booster, but that is likely as I cannot coax anymore speed out of the ROM like I could the ST.

Looks like your integer division is still a bit low, which probably accounts for half the speed difference. Should be 1.82 seconds for a 50MHz 030 with caches on.

Chip another couple of DTACK delays off!

BW

[exxos]

Looks like your integer division is still a bit low, which probably accounts for half the speed difference. Should be 1.82 seconds for a 50MHz 030 with caches on.

I am not sure if it is or not, because speeds are double when GB6 is running from TTRAM... As the tests are running from ST-RAM it as the code overhead which is probably why slowdown is there...

I don't really have any reference to what it is supposed to be..

[exxos]

TTRAM is being a bit sulky for some reason... FASTRAM.PRG just freezes after saying the RAM is installed, GB6 can install it but then I get screen corruption... The RAM is present as I poked some addresses in STOS..

IMG_6334.JPG (112.68 KiB) Viewed 3987 times

EDIT:


It looks like that odd address range corruption issue is back I wonder if there's a bad connection somewhere...

IMG_6335.JPG (67.92 KiB) Viewed 3985 times

TTRAM isn't behaving for some reason ..

IMG_6338.JPG (109.34 KiB) Viewed 3980 times

[Badwolf]

Looks like your integer division is still a bit low, which probably accounts for half the speed difference. Should be 1.82 seconds for a 50MHz 030 with caches on.

I am not sure if it is or not, because speeds are double when GB6 is running from TTRAM... As the tests are running from ST-RAM it as the code overhead which is probably why slowdown is there...
I don't really have any reference to what it is supposed to be..

The integer division is consistent across ST-RAM and AltRAM.

You had 1.820 in this post with AltRAM, and here's my 50MHz 030 with ST-RAM only:

IMG_4168.jpeg (119.29 KiB) Viewed 3975 times

Bang on.

BW.