REV 3 - REV 5 - The beginning (ST536)
Re: REV 3 - REV 5 - The beginning (ST536)
Looks interesting, how does this new fpga compare footprint-wise to the old chip?
If it ain't broke, test it to Destruction.
Re: REV 3 - REV 5 - The beginning (ST536)
About the same.PhilC wrote: Tue Nov 17, 2026 11:09 pm Looks interesting, how does this new fpga compare footprint-wise to the old chip?
-
Marcopolomint1
- Posts: 35
- Joined: Wed Jul 15, 2026 2:37 pm
Re: REV 3 - REV 5 - The beginning (ST536)
If you were a betting man would you say you might have a product for sale by end of 2027. Then does the STE536 lifecycle only have to tweak this or is there very significant design differences?
Curiosity killed the cat but it's exciting to know!!
Curiosity killed the cat but it's exciting to know!!
Re: REV 3 - REV 5 - The beginning (ST536)
ST536 & STE536 could be purchased right now. But I'm reluctant to sell because there are unknown problems and I can't guarantee there will ever be fixed. Some bought some boards but never seemed to start the project and those boards are now several versions behind.Marcopolomint1 wrote: Wed Nov 18, 2026 12:46 pm If you were a betting man would you say you might have a product for sale by end of 2027.
Its impossible to say a this point. The STE I've not had anywhere near as much troubles as the ST536. But it's not had much testing either. I need to repair my STE motherboards to test in multiple machines. But it's time I just never have.Then does the STE536 lifecycle only have to tweak this or is there very significant design differences?
Re: REV 3 - REV 5 - The beginning (ST536)
The FPGA demo boards have been sent to fab just. No idea how much that will cost getting 5 made (not from JLC!) , but it's the only way to test the FPGA chip out. It's supposed to be a Altera clone. But no way if its the same specs, better or worse.. Just have to build and see.
PCB routing of the FPGA ST536 is going very slowly. Arguably I could have routed it all myself manually by now.. But RSI and all that. Slower is better than hand pain .
To give an idea how slow it is. This is just trying to find the best routing for the caps under the FPGA.
Mostly as I have a ton of "routing specifications" I have given it to work with , which are pretty restricting. I do have to keep explaining where and what and how I want stuff to be done. So the routing and design is still my work, just I am not doing all the clicking anymore !
PCB routing of the FPGA ST536 is going very slowly. Arguably I could have routed it all myself manually by now.. But RSI and all that. Slower is better than hand pain .
To give an idea how slow it is. This is just trying to find the best routing for the caps under the FPGA.
Mostly as I have a ton of "routing specifications" I have given it to work with , which are pretty restricting. I do have to keep explaining where and what and how I want stuff to be done. So the routing and design is still my work, just I am not doing all the clicking anymore !
Re: REV 3 - REV 5 - The beginning (ST536)
I think the main problem is AI or auto routers don't seem to actually "see" obvious solutions to problems.
The pink area is the corridor it found which is not big enough to route some of the address pins from the CPU, but there is just simply one bottom track which could easily be moved to the left a couple of pads and then it would literally have 3x the room. This is why i'm keeping an eye on everything it does because it never seems to see obvious and simple solutions to problems a lot of the time.
The pink area is the corridor it found which is not big enough to route some of the address pins from the CPU, but there is just simply one bottom track which could easily be moved to the left a couple of pads and then it would literally have 3x the room. This is why i'm keeping an eye on everything it does because it never seems to see obvious and simple solutions to problems a lot of the time.
Re: REV 3 - REV 5 - The beginning (ST536)
Built a latest rev 5.66 board, its the same was as @coonsgm has been testing.. Place your bets.....

