REV 3 - REV 5 - The beginning (ST536)

All about the ST536 030 ST booster.
User avatar
PhilC
Moderator
Moderator
Posts: 7744
Joined: Fri Mar 23, 2018 8:22 pm

Re: REV 3 - REV 5 - The beginning (ST536)

Post by PhilC »

Looks interesting, how does this new fpga compare footprint-wise to the old chip?
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 29813
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: REV 3 - REV 5 - The beginning (ST536)

Post by exxos »

PhilC wrote: Tue Nov 17, 2026 11:09 pm Looks interesting, how does this new fpga compare footprint-wise to the old chip?
About the same.
Marcopolomint1
Posts: 35
Joined: Wed Jul 15, 2026 2:37 pm

Re: REV 3 - REV 5 - The beginning (ST536)

Post by Marcopolomint1 »

If you were a betting man would you say you might have a product for sale by end of 2027. Then does the STE536 lifecycle only have to tweak this or is there very significant design differences?
Curiosity killed the cat but it's exciting to know!!
User avatar
exxos
Site Admin
Site Admin
Posts: 29813
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: REV 3 - REV 5 - The beginning (ST536)

Post by exxos »

Marcopolomint1 wrote: Wed Nov 18, 2026 12:46 pm If you were a betting man would you say you might have a product for sale by end of 2027.
ST536 & STE536 could be purchased right now. But I'm reluctant to sell because there are unknown problems and I can't guarantee there will ever be fixed. Some bought some boards but never seemed to start the project and those boards are now several versions behind.
Then does the STE536 lifecycle only have to tweak this or is there very significant design differences?
Its impossible to say a this point. The STE I've not had anywhere near as much troubles as the ST536. But it's not had much testing either. I need to repair my STE motherboards to test in multiple machines. But it's time I just never have.
User avatar
exxos
Site Admin
Site Admin
Posts: 29813
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: REV 3 - REV 5 - The beginning (ST536)

Post by exxos »

The FPGA demo boards have been sent to fab just. No idea how much that will cost getting 5 made (not from JLC!) , but it's the only way to test the FPGA chip out. It's supposed to be a Altera clone. But no way if its the same specs, better or worse.. Just have to build and see.

PCB routing of the FPGA ST536 is going very slowly. Arguably I could have routed it all myself manually by now.. But RSI and all that. Slower is better than hand pain .

To give an idea how slow it is. This is just trying to find the best routing for the caps under the FPGA.

Capture.PNG
Capture.PNG (46.16 KiB) Not viewed yet

Mostly as I have a ton of "routing specifications" I have given it to work with , which are pretty restricting. I do have to keep explaining where and what and how I want stuff to be done. So the routing and design is still my work, just I am not doing all the clicking anymore !
Post Reply

Return to “ST536 030 ST ACCELERATOR”