2600 Composite mod

Post by **exxos** » Wed Apr 17, 2019 12:58 am

Its been over a year since this project was started. I'm going to try and get this project finished in the near future. I've found a few of the bits yesterday.. Still need to find the PCBs.. So might have to order some again. I really want to get my 2600 back together and have some fun with it

Post by **rubber_jonnie** » Wed Apr 17, 2019 9:06 am

Funnily enough, I still have this project on the books, I'd better dig it out and get on with it myself.

zack4mac · Post by **zack4mac** » Wed Apr 17, 2019 9:17 am

I have just bought set of boards for composite mod but look nothing like this,
using
3.3K , 2.2K resistor and 2N3904
nothings ever simple!

Post by **rubber_jonnie** » Wed Apr 17, 2019 9:25 am

zack4mac wrote: Wed Apr 17, 2019 9:17 am I have just bought set of boards for composite mod but look nothing like this,
using nothings ever simple!
3.3K , 2.2K resistor and 2N3904

I've built these using veroboard, they work well enough, but time to get on with the exxos one

Post by **exxos** » Wed Apr 17, 2019 6:45 pm

rubber_jonnie wrote: Wed Apr 17, 2019 9:06 am Funnily enough, I still have this project on the books, I'd better dig it out and get on with it myself.

So many projects and so little time

I want to close up all these unfinished projects so I can just concentrate on the remake motherboard.

Post by **exxos** » Wed Apr 17, 2019 9:32 pm

Found the PCB with parts listed..

There are a couple resistors I am not sure about at the bottom.. more of a "suck it and see" type thing. So some experimentation needed no doubt.

: 2600a2.png (95.84 KiB) Viewed 5372 times

Post by **PhilC** » Wed Apr 17, 2019 9:46 pm

I've got a couple of 2600s lined up for when you've finished

Post by **rubber_jonnie** » Wed Apr 17, 2019 10:02 pm

exxos wrote: Wed Apr 17, 2019 6:45 pm
rubber_jonnie wrote: Wed Apr 17, 2019 9:06 am Funnily enough, I still have this project on the books, I'd better dig it out and get on with it myself.
So many projects and so little time I want to close up all these unfinished projects so I can just concentrate on the remake motherboard.

Yeah, pretty much sums it up for me too!

Post by **exxos** » Thu Apr 18, 2019 7:47 pm

I have hunted high and low, and I cannot find these PCBs

, so I will have to order them again, which means another month wait

Post by **PhilC** » Thu Apr 18, 2019 7:50 pm

You need a various pcb box. Icky probably has a label you could use once you've got one.

exxos's Atari, Amiga & retro forum

2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod

Re: 2600 Composite mod