The Atari Portfolio 2 prototype

Blogs & guides and tales of woo by forum members.
User avatar
derkom
Moderator
Moderator
Posts: 1208
Joined: Sun Jul 29, 2018 6:45 pm

The Atari Portfolio 2 prototype

Post by derkom »

A few months ago, I came into possession of this curious looking hand-soldered and very bodged board, bearing only the text "ATARI MIDI", despite having no apparent connection to MIDI...

P1030198.JPG
P1030198.JPG (380.54 KiB) Viewed 3074 times
P1030199.JPG
P1030199.JPG (273.47 KiB) Viewed 3074 times

It was attached via a ribbon cable to this LCD screen of about 9.5" diagonal...

P1030200.JPG
P1030200.JPG (198.37 KiB) Viewed 3074 times
P1030201.JPG
P1030201.JPG (140.67 KiB) Viewed 3074 times

At first I thought, "could this be an STPad prototype?" But no, inspection of the board revealed that the processor is an OKI 80C88 and right next to it is a DIP M74029, the same CPU and ASIC combination used in the Portfolio, which was designed by DIP Research Ltd. in the UK. The two ROMs, labelled "BD 1.68" and "15 AUG 90", suggested that whatever this is, it's a little bit newer than the Portfolio, which was released in 1989.

First thing, I dumped the precious contents of the ROMs (attached to this post should anyone wish to inspect), which were thankfully still readable after more than 30 years, and sure enough, they do contain a version of DIP-DOS, the operating system used on the Portfolio. I knew that DIP-DOS in the Portfolio had an easter egg listing some of the DIP crew responsible for the project, so I searched for that in the ROM dump, and found it, with a very slightly different list:

eegg.png
eegg.png (36.88 KiB) Viewed 3074 times

So, this was definitely a Portfolio relative of some kind. I decided it was time to try to get some expert opinion on the subject, and I got in email contact with John Brett and David Frodsham, both of whom were interested in what I'd found, and it was David who confirmed that this is indeed a prototype for the large screen Portfolio 2, which never made it to market. David said, "I think what you have there is something extremely rare: a prototype of a large screen Atari Portfolio. It never made it to market but we were contracted to build a prototype."

This was a bit of a bombshell, as I'd never heard of any large screen Portfolio in development. I have since discovered a couple of references in old publications from around the time which rumoured the existence of a followup product never marketed, but that's it. It seems to have disappeared into history at that point.

Coming up very soon in a second post, does it work?
Attachments
Portfolio 2 - BD 1.68 ROMs.zip
(140.45 KiB) Downloaded 70 times
User avatar
exxos
Site Admin
Site Admin
Posts: 23499
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: The Atari Portfolio 2 prototype

Post by exxos »

Great stuff, nice find!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
derkom
Moderator
Moderator
Posts: 1208
Joined: Sun Jul 29, 2018 6:45 pm

Re: The Atari Portfolio 2 prototype

Post by derkom »

So, having dumped the ROMs, it was time to determine if this thing could still run. The board looked visually in excellent condition. There's a lot of flux on it, because it's all hand soldered, and I found a couple of roving solder balls, but under the microscope, it all looked pretty good.

Power input to the board is provided via a barrel jack as well as two test terminals helpfully labelled + and -. I pulled out the schematics for the released Portfolio 1 and built up schematics for the DC-DC section of this prototype board in KiCad, and unsurprisingly, it's virtually identical to the same section of the Portfolio 1. The board passed all my electrical checks, everything is connected as it should be, no shorts, etc., so it was time to power it up!

I set my bench PSU to 4.5 VDC (same power section as Portfolio 1, so this thing is designed to be powered by 3xAA cells), with a 150 mA current limit, and powered it up. Nothing on screen, and the PSU dropped down to around 2 VDC, which means the current limiter was hit. So I raised the current limiter to 300 mA and tried again, and...

P1030207.JPG
P1030207.JPG (195.03 KiB) Viewed 3070 times
P1030220.JPG
P1030220.JPG (278.86 KiB) Viewed 3070 times

:yay: It boots! The LCD is obviously not fully functional, but the BIOS is clearly there and starting up, presenting the DIP POST splash. After about 10 seconds it moves on to a keyboard selection menu:

P1030213.JPG
P1030213.JPG (192.07 KiB) Viewed 3070 times
P1030222.JPG
P1030222.JPG (257.67 KiB) Viewed 3070 times

And after sitting there for about 30 seconds it times out, and presents the standard DOS date prompt:

P1030218.JPG
P1030218.JPG (195.97 KiB) Viewed 3070 times
P1030224.JPG
P1030224.JPG (244.46 KiB) Viewed 3070 times

As I am presently unable to give it any input, this is as far as things get for now. I have verified that the keyboard connector is the same type as the Portfolio keyboard connector, and connecting to the same pins on the DIP chip, so I am assuming that a Portfolio keyboard will work, but I have not yet tested this.

The screen is somewhat more damaged than these photos show. It's missing half of the driver chips along the short dimension, and one of the two present is malfunctioning, so only the top quarter of the screen works, and even that is missing vertical sections. The screen is a Sharp part, but no reference to that particular part number appears online anywhere. However, as it's driven by an off-the-shelf Chips & Technologies 82C425 CGA LCD/CRT controller, a replacement should be relatively easy to source, and I have ordered a part that I believe will be compatible.

I don't want to connect the keyboard and take this any further until after I've gotten the replacement screen attached, because when I do get to the point of interacting with the device, I want the "full experience"!

Full size copies of all the images in these posts are available here.

More to come. Comments, thoughts, and suggestions from others welcome!
User avatar
Cyprian
Posts: 387
Joined: Fri Dec 22, 2017 9:16 am
Location: Poland

Re: The Atari Portfolio 2 prototype

Post by Cyprian »

Interesting finding, it could be a prototype of Portfolio's successor Sharp PC 3000 (made also by DIP) https://en.m.wikipedia.org/wiki/Sharp_PC-3000
Lynx I / Mega ST 1 / 7800 / Portfolio / Lynx II / Jaguar / TT030 / Mega STe / 800 XL / 1040 STe / Falcon030 / 65 XE / 520 STm / SM124 / SC1435
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
czietz
Posts: 548
Joined: Sun Jan 14, 2018 1:02 pm

Re: The Atari Portfolio 2 prototype

Post by czietz »

Over in the other forum, there is someone who was part of the Portfolio development team at DIP and wrote a book about it: https://www.atari-forum.com/viewtopic.p ... 86#p422786. Probably, he could provide further insight.
User avatar
derkom
Moderator
Moderator
Posts: 1208
Joined: Sun Jul 29, 2018 6:45 pm

Re: The Atari Portfolio 2 prototype

Post by derkom »

Cyprian wrote: Sun Jun 19, 2022 11:46 am Interesting finding, it could be a prototype of Portfolio's successor Sharp PC 3000 (made also by DIP)
I agree that this is somewhere in between the Portfolio and the PC-3000. Probably closer to the Portfolio, and David confirms that DIP were contracted to build a prototype.

I noticed when poking through the ROM that there is a reference to pressing the Atari key on the keyboard for a help screen. Of course this key did not exist on the PC-3000.

And of course there's the fact that it says "ATARI" right on the board. ;)
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: The Atari Portfolio 2 prototype

Post by rubber_jonnie »

Really neat find, very interesting.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
MindThreat
Posts: 3
Joined: Sat Dec 18, 2021 9:17 am

Re: The Atari Portfolio 2 prototype

Post by MindThreat »

That’s too cool, truly fascinating! Thanks for sharing. Neat that it still kind of works!
User avatar
derkom
Moderator
Moderator
Posts: 1208
Joined: Sun Jul 29, 2018 6:45 pm

Re: The Atari Portfolio 2 prototype

Post by derkom »

So, the source for a Sharp screen that is very similar to the one originally connected to the prototype fell through, but I found a Seiko 640x200 LCD that is compatible. However, it requires a -24 VDC drive voltage and an additional negative voltage to control contrast (sweet spot here ended up being -16). As the Portfolio board is generating only -17 VDC, I decided it was finally time to upgrade my old single channel bench PSU to something better, and I got a OWON ODP3033 3-channel PSU, and so far I'm very happy with it.

On to the good stuff!

I hooked up the new screen, the PSU, and a Portfolio keyboard, and ended up with a setup that looks like this:

p2-203.jpg
p2-203.jpg (272.31 KiB) Viewed 2643 times

The BIOS POST screen is now complete:

p2-202.jpg
p2-202.jpg (165.1 KiB) Viewed 2643 times

Here's how things look right after dropping into DIP-DOS:

p2-204.jpg
p2-204.jpg (211.77 KiB) Viewed 2643 times

Built-in Lotus 123-compatible spreadsheet:

p2-205.jpg
p2-205.jpg (175.38 KiB) Viewed 2643 times

Diary, which can show alongside DIP-DOS (but does not appear to multitask):

p2-206.jpg
p2-206.jpg (206.16 KiB) Viewed 2643 times

Calculator:

p2-207.jpg
p2-207.jpg (184.99 KiB) Viewed 2643 times

Text editor, with requisite greets:

p2-208.jpg
p2-208.jpg (171.4 KiB) Viewed 2643 times

Settings menu, where various things can be done, including inverting and adjusting the display:

p2-209.jpg
p2-209.jpg (288.25 KiB) Viewed 2643 times
p2-210.jpg
p2-210.jpg (219.24 KiB) Viewed 2643 times

Also the size and position of the various apps can be controlled from here:

p2-211.jpg
p2-211.jpg (233.05 KiB) Viewed 2643 times

Next, I stuck in the one Portfolio (actually DIP Pocket PC) card I have, to verify that this board can run Portfolio software off Portfolio cards:

p2-212.jpg
p2-212.jpg (326.88 KiB) Viewed 2643 times
p2-213.jpg
p2-213.jpg (214.5 KiB) Viewed 2643 times

...which it can!

And finally, pulling up the old Portfolio easter egg, which is still accessed in the same way, although with a slightly different output:

p2-214.jpg
p2-214.jpg (227.65 KiB) Viewed 2643 times

So, everything does indeed appear to be working just fine, some 32 years later. I think I will try to get all of this set up in some manner appropriate for display (and not requiring a bench PSU to make it work!), but that'll likely wait until I have fewer things on my plate, so unless someone wants to know or see something in particular, I think this project is done for now!
Post Reply

Return to “MEMBER BLOGS”