Is actually stupid because the singletrack from top to bottom easily be straight down, and the only breakout would actually be for the cartridge connector assuming we wanted a direct route.Send it over.....exxos wrote: Tue Jul 30, 2019 5:47 pm I'm really just thinking of starting to route that area myself now... Or better still, where's Icky...
exxos wrote: Tue Jul 30, 2019 9:48 pm Bodge capacitor and firmware tweak later...Finally booted up to TOS206... passed over 40 loops (YAART 4MB) so now the board is stable.
No time tonight to work on the basic IDE firmware... but at least its now booting
- snap. Trudie number two is also bootingand successfully broken by our Destruction department.
) and is currently routing the buses between the blitter,glue,cpu,rom, mmu manually. The H2 I have already basically routed 50% of it already, so I dare say would would be up to 70% or thereabouts easily after that routing is done. So while there may not be much news on the H2, a lot is going on "behind the scenes" so rest assured we are working on it each week 
