General Stuff(tm)

Blogs & guides and tales of woo by forum members.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

Phew, just a bad connection on one of the pins.

I think I may take the chip out and give all of the pins a fresh coating of solder.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

I've gone back to basics with my own test ROM.

I've managed to get it to read and write to serial port A now, which makes debugging a whole lot easier with output!!!

Anyway, enough for today.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
exxos
Site Admin
Site Admin
Posts: 29841
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: General Stuff(tm)

Post by exxos »

stephen_usher wrote: Thu Nov 12, 2026 9:09 pm I've managed to get it to read and write to serial port A now, which makes debugging a whole lot easier with output!!!
:thumbup:
Anyway, enough for today.
Wahhh, another good 5 hours left in the day yet !
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

No progress today. I just can't find the special sauce I need to turn on access (read or write) to RAM and data read access to ROM. I have instruction only access to the ROM addresses.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

A slight breakthrough with the Sun 3/80 ROM coding.

I've discovered that the ROM is really situated at 0x63000000 and not 0xfefe0000, with the latter being a code read-only mirror, so trying to read data from that location causes a bus error. So, relocating my code to 0x63000000 allows me to use strings from the ROM!

In other news, the KS3 upgrade motherboard for the Spectrum Next arrived this afternoon and that's now fitted and working. Not sure what I'll do with the KS1 M/B
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

JUst as I was about to close up for the night I thought that I'd just flash the Sun 3/80 boot ROM version 3 onto the OneROM, even though I don't have the motherboard patches to support it. What do you know, it actually starts up and goes into the diagnostics!!!

IMG_5519.jpeg
IMG_5519.jpeg (213.52 KiB) Viewed 26 times

Unfortunately this tells me that the Bus Error Register control is also shot and it's not just the serial port side of the DECODE1 chip which is shot. The other erros could well be because of the missing hardware patch.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

After I discovered that the Xgecu T48 can read and write to M48T02 @K clock/NVRAM chips I decided to write a program to crate the contents for a Sun workstation. Doing this on even a fully working Sun 3/80 is "fun" (for negative values of fun) and on a half dead machine it's impossible.

Anyway, I got a working prototype this morning, programmed the re-batteried NVRAM with my settings and... accidentally booted the kernel!

IMG_5521.jpeg
IMG_5521.jpeg (147.6 KiB) Viewed 9 times

The machine hangs at this point, when it tries to access the parallel port but it does start.

I've now completed the program, made it more flexible etc. and posted it to Github. https://github.com/stephen-usher/SunNVRAM

I've also done something silly... a Sun 3/80 appeared on eBay in Germany, the first I've seen on sale since about 2018, and even though it was pretty expensive and sold as spares or repairs I've bought it. The case isn't in great condition but I only need the motherboard.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
PhilC
Moderator
Moderator
Posts: 7748
Joined: Fri Mar 23, 2018 8:22 pm

Re: General Stuff(tm)

Post by PhilC »

Ah, you've had a case of the @rubber_jonnie's. Hopefully the new one will work and help you also fix the old one
If it ain't broke, test it to Destruction.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7723
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

PhilC wrote: Sun Nov 22, 2026 7:26 pm Ah, you've had a case of the @rubber_jonnie's. Hopefully the new one will work and help you also fix the old one
*IF* the new one is operational.... The DECODE1 chip could have the same bit rot if it's from the same batch and they used the wrong dopants.

More likely I'll just swap the motherboards.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Post Reply

Return to “MEMBER BLOGS”