Einstein a Go-Go

Blogs & guides and tales of woo by forum members.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15607
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Einstein a Go-Go

Post by rubber_jonnie »

Left SHIFT switch is now removed and fitted in the H position.

PXL_20261120_142536261.jpg
PXL_20261120_142536261.jpg (319.2 KiB) Viewed 17 times


All is working well, though there were a few switches playing up still, so I have put some contact cleaner in and after a bit of repeat operation they have all started working nicely.

I've found what appears to be a new Alps SKCC key switch on eBay that visually at least is a very good match, so once I get it and proved it good (or bad) I'll update on here as to the switch type.

I do have a box of Cherry MX switches that seem to have the same keycap fitting, but they neither fit the keycap or the PCB. I have BBC B key switches too and they don't fit either, which is annoying!!

Next up I need to sort out the Gotek.

Interestingly it came with 2 FDD cables so I at least have those as a starting point. Well those and the drawer full of cables I have...

I also did some preventative maintenance on the PSU as recommended by somebody over at Vintage-radio.net, which was to replace CE05 for a 105C version rather than an 85C version, and to check both RE08 and RE10 were within tolerance (5%), which they were.

Fingers crossed that'll run for another 40+ years :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 15607
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Einstein a Go-Go

Post by rubber_jonnie »

And we are now operational with a Gotek:

PXL_20261120_153324399.jpg
PXL_20261120_153324399.jpg (284.21 KiB) Viewed 8 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7721
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: Einstein a Go-Go

Post by stephen_usher »

You could try drilling a 1mm hole in both parts of the post and fit a piece of cut-off paper clip wire in there with a small dab of epoxy on the end of the wire as you push it into the holes.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7721
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: Einstein a Go-Go

Post by stephen_usher »

rubber_jonnie wrote: Fri Nov 20, 2026 3:52 pm And we are now operational with a Gotek:
Those TMS VDP colours... recognisable anywhere.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Post Reply

Return to “MEMBER BLOGS”