General Stuff(tm)

Blogs & guides and tales of woo by forum members.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7713
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

Phew, just a bad connection on one of the pins.

I think I may take the chip out and give all of the pins a fresh coating of solder.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7713
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

I've gone back to basics with my own test ROM.

I've managed to get it to read and write to serial port A now, which makes debugging a whole lot easier with output!!!

Anyway, enough for today.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
exxos
Site Admin
Site Admin
Posts: 29811
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: General Stuff(tm)

Post by exxos »

stephen_usher wrote: Thu Nov 12, 2026 9:09 pm I've managed to get it to read and write to serial port A now, which makes debugging a whole lot easier with output!!!
:thumbup:
Anyway, enough for today.
Wahhh, another good 5 hours left in the day yet !
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7713
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

No progress today. I just can't find the special sauce I need to turn on access (read or write) to RAM and data read access to ROM. I have instruction only access to the ROM addresses.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7713
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: General Stuff(tm)

Post by stephen_usher »

A slight breakthrough with the Sun 3/80 ROM coding.

I've discovered that the ROM is really situated at 0x63000000 and not 0xfefe0000, with the latter being a code read-only mirror, so trying to read data from that location causes a bus error. So, relocating my code to 0x63000000 allows me to use strings from the ROM!

In other news, the KS3 upgrade motherboard for the Spectrum Next arrived this afternoon and that's now fitted and working. Not sure what I'll do with the KS1 M/B
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Post Reply

Return to “MEMBER BLOGS”