Page 1 of 1
Atari ST Floppy Adapter
Posted: 08 Jul 2018 16:16
by Atarian Computing
I ran into this thread and got inspired to have a crack at my own version:
https://forum.atari-home.de/index.php/t ... 448.0.html
This has not been tested so keep that in mind. I also had to create the DIN14 symbol using only photos I took of the port and connector and their dimensions. Should be the right size. I spent way too much time on this :)
Top.png
Bottom.png
Here are my KiCad files.
Re: Atari ST Floppy Adapter
Posted: 08 Jul 2018 17:20
by exxos
:bravo:
Re: Atari ST Floppy Adapter
Posted: 09 Jul 2018 05:01
by Gargoyle
This looks nice and tidy! :) In theory, would you be able to connect up a CosmosEx externally using this adapter design, if you do a Drive A/B switch mod to your ST or STE? Power would be provided via a phone charger, which is what I use currently to get a decent current from instead of my STE board's connector.
Re: Atari ST Floppy Adapter
Posted: 09 Jul 2018 10:59
by rubber_jonnie
Something I'm also looking at, nice idea, gives me food for thought :)
:goodpost:
Re: Atari ST Floppy Adapter
Posted: 09 Jul 2018 15:17
by frank.lukas
I like to buy a Atari ST Floppy Adapter or only a PCB ... !?!
Re: Atari ST Floppy Adapter
Posted: 09 Jul 2018 15:53
by Atarian Computing
frank.lukas wrote: 09 Jul 2018 15:17
I like to buy a Atari ST Floppy Adapter or only a PCB ... !?!
None exist or have been produced by myself. This is something I made on Sunday so no guarantee it works :)
Re: Atari ST Floppy Adapter
Posted: 09 Jul 2018 16:00
by frank.lukas
Or have you GERBER files to produce the adapter ?