"SuperVidel" style graphics for the DFB1X2?
Posted: 22 Nov 2026 11:46
SuperVidel style graphics for the DFB1X2?
I've been having a dig around the SuperVidel recently, mostly out of curiosity, and it got me wondering if something along those lines for the DFB1X2 would be of any interest to people.
It would basically be a cut down version of the SuperVidel. Nothing is decided yet, I'm just trying to gauge interest before I sink any time into it.
The problem is there isn't a lot of info out there on how it is all supposed to work. Nature did publish a register map, and the SuperVidel XBIOS driver turns up as a binary in the CT60 TOS 3.00 release, but I can't find the VHDL anywhere and the drivers are closed source. So a fair bit of it would need working out from scratch.
The other question is the software side. The SuperVidel uses its own NVDI drivers rather than pretending to be an existing graphics card. NVDI also has drivers for ET4000 based cards, so one option would be to make it look like one of those so existing drivers just work. The other option would be to copy the SuperVidel register layout so its drivers could be used instead. The ET4000 route might just be simpler, as it avoids relying on closed drivers that were written for the CT60. I've not looked into either properly yet, so if anyone knows how the ET4000 side of NVDI works, or has any SuperVidel docs I've not found, I'd be interested.
I should also say up front, as it would be hooking into the 030 bus, people can't expect miracles. It's never going to be a CT60 with a SuperVidel. But a faster ET4000 type setup may be relatively simple to build, and that alone could be a decent step up for GEM and higher resolutions.
So, would anyone actually use it? And what would you want from it, higher resolutions on a modern monitor, faster GEM, or something else?
I've been having a dig around the SuperVidel recently, mostly out of curiosity, and it got me wondering if something along those lines for the DFB1X2 would be of any interest to people.
It would basically be a cut down version of the SuperVidel. Nothing is decided yet, I'm just trying to gauge interest before I sink any time into it.
The problem is there isn't a lot of info out there on how it is all supposed to work. Nature did publish a register map, and the SuperVidel XBIOS driver turns up as a binary in the CT60 TOS 3.00 release, but I can't find the VHDL anywhere and the drivers are closed source. So a fair bit of it would need working out from scratch.
The other question is the software side. The SuperVidel uses its own NVDI drivers rather than pretending to be an existing graphics card. NVDI also has drivers for ET4000 based cards, so one option would be to make it look like one of those so existing drivers just work. The other option would be to copy the SuperVidel register layout so its drivers could be used instead. The ET4000 route might just be simpler, as it avoids relying on closed drivers that were written for the CT60. I've not looked into either properly yet, so if anyone knows how the ET4000 side of NVDI works, or has any SuperVidel docs I've not found, I'd be interested.
I should also say up front, as it would be hooking into the 030 bus, people can't expect miracles. It's never going to be a CT60 with a SuperVidel. But a faster ET4000 type setup may be relatively simple to build, and that alone could be a decent step up for GEM and higher resolutions.
So, would anyone actually use it? And what would you want from it, higher resolutions on a modern monitor, faster GEM, or something else?