Page 1 of 2
Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 11:50
by rubber_jonnie
It's here!!!
- PXL_20261019_101704821.jpg (370.19 KiB) Viewed 66 times
More to follow...
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 12:02
by HigashiJun
Yay, a second one !
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 12:03
by rubber_jonnie
HigashiJun wrote: 19 Oct 2026 12:02
Yay, a second one !
Pretty pleased to have another and looking forwards to opening it up fort inspection :)
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 13:29
by alexh
Was the one you had just a little bit unreliable? Or this one just too good a deal to pass up?
Looking forward to seeing if you get it working and which one you keep.
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 13:34
by rubber_jonnie
So all stripped down and I was right about the heatsink for Nick, it was floating around...
- PXL_20261019_120406946.jpg (433.64 KiB) Viewed 41 times
It's a little dusty inside, though much better than my other one:
- PXL_20261019_120235138.jpg (302.35 KiB) Viewed 41 times
- PXL_20261019_120852965.jpg (367.62 KiB) Viewed 41 times
However overall it's in much better electronic condition than my other machine.
It boots:
- PXL_20261019_120750270.jpg (279.68 KiB) Viewed 41 times
- PXL_20261019_120752670.jpg (278.85 KiB) Viewed 41 times
- PXL_20261019_120825229.jpg (276.73 KiB) Viewed 41 times
So it'll be getting a ROM upgrade once I clean it up a little and re-fit the Nick heatsink. Hopefully the Z80 in this one won't be dead and hate ram expansions...
The only problem area is the case around the joystick, which is fine when assembled, but not when it isn't...
- PXL_20261019_120242990.jpg (203.88 KiB) Viewed 41 times
However I have no worries that I'll be able to get it up and running and have already got new keys in (Though they aren't quite the right ones they firt :) )
So looks like this is going to be more of a physical resto then electronic :)
Also, so far, TR2 hasn't blown up, which is a good sign.
Keyboard membrane seems OK, however I will reserve judgement until later.
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 13:36
by rubber_jonnie
alexh wrote: 19 Oct 2026 13:29
Was the one you had just a little bit unreliable? Or this one just too good a deal to pass up?
Looking forward to seeing if you get it working and which one you keep.
Well it's working as you can see from my previous post, but needs some TLC on the case.
I'll likely be keeping both, it was a good price and I feel these machines need to be kept running for posterity :)
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 15:08
by rubber_jonnie
And in news that everyone expected, the keyboard membrane disintegrated like a pice of rice paper baked for an hour at 200C...
Another visit to SellMyRetro, though I could order one with my other parts for the SD card solution from the Enterprise forum...
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 15:13
by PhilC
@rubber_jonnie would you be able to order a second SD card solution and then send it me when it arrives? I'll PayPal you whatever you think is fair for it.
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 15:27
by alexh
Me three?
Re: Egyptian Enterprise 64 number 2
Posted: 19 Oct 2026 15:43
by rubber_jonnie
@PhilC @alexh
In theory yes, prices are as follows:
The SD card reader is £72
The case is £22 - If you want one, I do.
The formatted SD card is £12 - If you want one, I don't.
The package with tracking number postage is £48 - Coming from Hungary but may be more for more items. I'd have to speak to the seller.
See here for details -
Hungarian Enterprise stuff
Given the cost I would need the funds up front and I'll need to know if you want a case or SD card.
As for the shipping I won't know what that would be without confirmation of what you want so I can check with the seller. Happy to split shipping 3 ways and we can work out whats next when it arrives.
Hopefully that makes sense.