exxos's Atari, Amiga & retro forum

Hi all,

I made a 3D Printable base for TT / MSTe PSU. It's no work of art, but should do the job. you'll need to self-tap or drill holes for the screws into the stand-offs. I've saved it as STL and STEP, feel free to improve it.

I'll print it and make any adjustments if necessary.

Thingiverse link: Thingiverse

Nice! I'm going to print one of these :D

@dml I printed it out and made some adjustments, here's v3:

I've put it on Thingiverse now: https://www.thingiverse.com/thing:7023738

Great!

I wonder if something like this exists for mounting those tiny single CFLash adapters inside a Falcon? Or even just to replace the IDE mounting bracket generally.

I'll have a look and see later today....

@dml Yeah there are quite a few different types on Thingiverse:

https://www.thingiverse.com/search?q=at ... con&page=1
https://www.thingiverse.com/thing:4619897
https://www.thingiverse.com/thing:4568911

Steve wrote: 29 Apr 2025 13:47 @dml Yeah there are quite a few different types on Thingiverse:

https://www.thingiverse.com/search?q=at ... con&page=1
https://www.thingiverse.com/thing:4619897
https://www.thingiverse.com/thing:4568911

just when I thought I could pack the printer away, I see lot of things I need to print :D

Here's the latest version, v7:

Any pictures of someone making and using one?

Here @alexh :

Looking at the PSU there doesn't appear to be any GND attached to the base? And no thermal contacts either so it wasn't a heatsink or ground so no issues being plastic rather than metal? I wonder why it wasn't plastic originally? Some EC wireless interference thing?