exxos's Atari, Amiga & retro forum

I'm selling an original Falcon 030 (purchased by the previous owner as a C-Lab Falcon MK-I). It was completely serviced by me, i.e. every port, every feature was checked against the official Atari Test Fixture. So not the usual "seemed to work, no guaranty" kind of deal, everything does work. No sound crackles (despite the lack of a clock patch), no nasty surprises. The complete specs:

• UK flavour (keyboard, case)
• 14 MB RAM (a board by ATIN Electronics, it seems that cutting the metal shield was part of its installation, unfortunately...)
• TOS 4.04
• FPU 68882 (the 33 MHz flavour, although it runs on 16 MHz of course)
• 2 GB IDE DOM
• all metal shields
• all screws (incl. the bolts on the DSUB connectors)
• original Atari mouse and Atari VGA adaptor
• original box and inserts

As for the technical / visual state:

• the PCB (and of course the case) has been thoroughly cleaned
• no modifications have been done - no recapping, no NVRAM replacement, no clock patch installation (but see below on that), no retrobrighting
• the floppy drive and mouse are a bit worn out visually, I didn't want to disassemble them (not my forte) however they work 100%
• the case and keyboard is spotless, no single trace of yellowing
• the metal shield has a chunk cut off due to the memory card installation
• the box is definitely worn out and marked with letters

Asking 2400 EUR + shipping. Preferred Paypal for friends or IBAN transfer but if you are willing to pay the fees, Paypal for goods works for me as well.

Additionally, if the buyer is interested, I can provide following after-deal services:

• clock patch installation: 100 EUR
• NVRAM replacement for a battery-backed one: 100 EUR
• PCB recapping: 200 EUR

However these services are outside of the scope of this deal, we will agree on individual basis (but naturally, you agree with a later delivery in that case).

Also advertised elsewhere.

Sold.