exxos's Atari, Amiga & retro forum

Hello
I received and install the DBFX1 card, only the first 2 "LEDs" lights up ....
Falcon starts on normal configuration, the 128 mo memory are not recognized, only the STRam, .... and only the Copro (@16mhz) with sysinfo, i've no copro on the mobo.

jidewe wrote: 04 Feb 2024 14:45 Hello
I received and install the DBFX1 card, only the first 2 "LEDs" lights up ....
Falcon starts on normal configuration, the 128 mo memory are not recognized, only the STRam, .... and only the Copro (@16mhz) with sysinfo, i've no copro on the mobo.

Please have a look at the install page here: DFB1/X documentation

rubber_jonnie wrote: 06 Feb 2024 11:56

jidewe wrote: 04 Feb 2024 14:45 Hello
I received and install the DBFX1 card, only the first 2 "LEDs" lights up ....
Falcon starts on normal configuration, the 128 mo memory are not recognized, only the STRam, .... and only the Copro (@16mhz) with sysinfo, i've no copro on the mobo.

Please have a look at the install page here: DFB1/X documentation

ok thanks, i've read it before, but not understand all ..... (sorry i'm frenchie), it's ok now, whit teradesktop i can see ST ram and TT ram, i thing he version of sys info is not the best for this case.

jidewe wrote: 06 Feb 2024 20:13

rubber_jonnie wrote: 06 Feb 2024 11:56

Please have a look at the install page here: DFB1/X documentation

ok thanks, i've read it before, but not understand all ..... (sorry i'm frenchie), it's ok now, whit teradesktop i can see ST ram and TT ram, i thing he version of sys info is not the best for this case.

Good stuff :)

a little photo with Freemint et XAAES, next installation of thing or jinnee


MODERATOR NOTE - FIXED HOT LINKED IMAGE.

jidewe wrote: 19 Feb 2024 20:37 a little photo with Freemint et XAAES, next installation of thing or jinnee

Thanks for the feedback. But please note hotlinking isn't allowed :)

My DFB1X is somewhere above the Atlantic, and I will received soon.

In the mean time, I am looking all over the web, video included how to flash the Bank 1 with Emutos 1.3 512K.

I just want confimation I will do the right thing before burn the EPROM.

1- JE header; jump 'disable booster'
2 - BS1 header; open jumper <----- Bank 0 is TOS 4.04, to put EMUTOS in bank 1 IS THAT CORRECT ?
3- extract Emutos 'etos512us, img'
4- power the Falcon
5- use program 'DFBFLASH.TTP' with the TOS image <----- WHERE TO FIND THIS PROGRAM ?

6- put all jumpers to normal position, choose Bank 0 or Bank 1 for booting

Voila!

zfrenchy wrote: 17 Jun 2024 00:30...
5- use program 'DFBFLASH.TTP' with the TOS image <----- WHERE TO FIND THIS PROGRAM ?
...

Under DFB-tools folder on the Github.

thank you