exxos's Atari, Amiga & retro forum

Hi everyone. I am new at this board. This is a reCapping question.

I have a Mega STE. (US 120v NTSE). I noticed that Exxos sells a recap kit MSTE PSU REPAIR KIT PHIHONG PSM-5341 240V type. [0064]
My PS is also a PSM-5341. When I did a comparison of caps between the recap kit and my PS, I see the following differences:

(C6) 120uF 400v [kit 150uF]
(C15,C16) 1000uF 16v [kit 1500uF]
(C17,C18) 680uF 16v [kit 1500uF]
(C14) 2200uF 10v [kit 4700uF 16v]
(C26) 4.7uF 50v [kit 10uF]
(C8) 100uf 25v [kit 35v]
(C23) 22uf 25v [missing in kit]

Are these differences because of 240 volt vs 120 volt? or are these enhancements to make the PS run better?
If anyone is interested, I also put together a Cap list for the Main Board. There are 39 caps. I did not see a Cap Kit for the Main Board on Exxos.
Thanks in advance. Pete.

MyAtari@Exxos wrote: 02 May 2023 02:03 are these enhancements to make the PS run better?

Yes.

https://exxosforum.co.uk/atari/last/psu ... tm#PSM5341

The caps supplied according to the store..

150uF 400V (C6),10uF 400V (C7), 16V 1500uF x4 (C15,C16,C17,C18) , 16V 4700uF x2 (C13,C14) ,10V 100uF (C19), 10uF 50V (C26) , 3.3uf (C20), 100uf 35V (C8),220uF 25V (C24) ,CNY17F OPTO.