exxos's Atari, Amiga & retro forum

Hi!

I'm wiring up in a 110V configuration Exxo's new PSU and I cant find a guide when using the original 4 pin switch, and i cant seem to find (pref) a link for the new SPST switch, any ideas?

TIA!

RetroPassionUK wrote: 24 Sep 2022 15:03 i cant seem to find (pref) a link for the new SPST switch, any ideas?

viewtopic.php?f=9&t=1511

exxos wrote: 24 Sep 2022 15:09

RetroPassionUK wrote: 24 Sep 2022 15:03 i cant seem to find (pref) a link for the new SPST switch, any ideas?

viewtopic.php?f=9&t=1511

Hi thanks i found this but it shows the 2 pin switch (New) and not the original atari 4 pin switch? have I missed something?

Sorry thought that was what you was asking for.

I don't think there is a guide. But instead of wiring one PSU wire direct to the switch, you route it via the switch also.

Like this https://www.exxosforum.co.uk/atari/last ... switch.jpg
Except you will have parallel wires going to the switch for 110v.

exxos wrote: 24 Sep 2022 15:39 Like this https://www.exxosforum.co.uk/atari/last ... switch.jpg
Except you will have parallel wires going to the switch for 110v.

Thank you and all done!!



:-)

:bravo:

Could you take a image of the wiring so I can add it to the 110v page ? Would help others in the future :)