Page 1 of 2

EXXOS's new C1 build

Posted: 30 Jun 2022 14:53
by exxos
Onwards..

IMG_0644.JPG
IMG_0644.JPG (342.22 KiB) Viewed 3719 times
IMG_0645.JPG
IMG_0645.JPG (414.57 KiB) Viewed 3719 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 14:55
by exxos
Poking the connectors through making sure no bent pins. Then soldering.

IMG_0646.JPG
IMG_0646.JPG (259.45 KiB) Viewed 3718 times
IMG_0647.JPG
IMG_0647.JPG (313.67 KiB) Viewed 3718 times
IMG_0648.JPG
IMG_0648.JPG (237.73 KiB) Viewed 3718 times
IMG_0649.JPG
IMG_0649.JPG (239.06 KiB) Viewed 3718 times
IMG_0650.JPG
IMG_0650.JPG (279.55 KiB) Viewed 3718 times
IMG_0651.JPG
IMG_0651.JPG (258.1 KiB) Viewed 3718 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 14:56
by exxos
Simm socket next.

IMG_0652.JPG
IMG_0652.JPG (237.74 KiB) Viewed 3717 times
IMG_0653.JPG
IMG_0653.JPG (236.24 KiB) Viewed 3717 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 14:56
by exxos
2 pin header for the DUALTOS ROM.

IMG_0654.JPG
IMG_0654.JPG (257.34 KiB) Viewed 3716 times
IMG_0655.JPG
IMG_0655.JPG (293.02 KiB) Viewed 3716 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 14:58
by exxos
RTC not being used here. So blob the 2 pins.

IMG_0656.JPG
IMG_0656.JPG (259.36 KiB) Viewed 3714 times
IMG_0657.JPG
IMG_0657.JPG (257 KiB) Viewed 3714 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 14:59
by exxos
OSC fitted.

IMG_0658.JPG
IMG_0658.JPG (294.6 KiB) Viewed 3713 times
IMG_0659.JPG
IMG_0659.JPG (277.99 KiB) Viewed 3713 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 15:53
by exxos
Salvaging parts from a scrap board.

IMG_0660.JPG
IMG_0660.JPG (391.04 KiB) Viewed 3690 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 16:21
by exxos
A few chips in place and cartridge port soldered in.

IMG_0661.JPG
IMG_0661.JPG (351.89 KiB) Viewed 3683 times
IMG_0662.JPG
IMG_0662.JPG (294.44 KiB) Viewed 3683 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 16:55
by exxos
Correct resistors fitted.

IMG_0664.JPG
IMG_0664.JPG (370.84 KiB) Viewed 3670 times
IMG_0665.JPG
IMG_0665.JPG (347.66 KiB) Viewed 3670 times

Re: EXXOS's new C1 build

Posted: 30 Jun 2022 17:44
by exxos
Keyboard jumper done and keyway cut.

IMG_0666.JPG
IMG_0666.JPG (231.38 KiB) Viewed 3659 times
IMG_0668.JPG
IMG_0668.JPG (240.72 KiB) Viewed 3659 times