exxos's Atari, Amiga & retro forum

I used the 3v3 regulator from the DFB1 (all I had) which is why it looks weird with one leg bent over. Just finished programming, will test next :) I'm aware @Badwolf will be ready with a new @ijor inspired firmware soon so I'll flash that as soon as it is hot off the press ;) I could only get 50mhz Osc for this, which is fine as I ideally want to use this with a 68010 which probably won't clock as highly.

That's a good start :)

Just testing: EmuTOS Icons and screen redraws are black. Frontbench locks up at the same place each time, no bombs. I suspect the new firmware will fix these issues.

And some YAARTT test, seems TT RAM has an issue.

@Steve You could try my build but it's not perfect and still has same problems as the original with alt-ram. But it may behave a little better :shrug:

Good luck with the 010 @Steve, I tried one at 32 mhz once, it booted a couple of times and then died, never to boot again.

Good start, Steve!

What's the host machine? STFM?

BW

PhilC wrote: 13 May 2022 22:37 Good luck with the 010 @Steve, I tried one at 32 mhz once, it booted a couple of times and then died, never to boot again.

I think I tried running one at 16MHz in my STE booster ages ago and think I gave up in the end. Those things BURN!

Fun whilst it lasted @exxos :lol:

@Badwolf same as you actually, an STe with exxos's adapter.