exxos's Atari, Amiga & retro forum

Hi,
I'm just trying to use RetroTink 5x with my ST (520 STM) but can't make it work with SCART RGB... I've tried two SCART cables (both work in RGB mode with my SCART TV) but RetroTink only displays "no signal" (in SCART RGB input mode)..
Any ideas what might be wrong?

I would contact Retrotink support personally. Could be an issue with the SCART cable. Apparently some SCART cables can be down-right dangerous depending on how they've been configured/wired.