Page 1 of 1
dragmar's H5 rev. B1 build
Posted: 14 Feb 2021 13:37
by dragmar
Finally I have started !
I have run out of a 40-pin DIP IC socket, and golpins on jumpers. FOR this I also need goldpins for the keyboard and a power socket. ?
IMG_20210214_114430_HDR.jpg
Does anyone have information on good 6PIN sockets
Re: dragmar's H5 rev. B1 build
Posted: 14 Feb 2021 13:40
by exxos
dragmar wrote: 14 Feb 2021 13:37
I have run out of a 40-pin DIP IC socket, and golpins on jumpers. FOR this I also need goldpins for the keyboard and a power socket. ?
You don't need gold pins.. unless you like the bling..
dragmar wrote: 14 Feb 2021 13:37
Does anyone have information on good 6PIN sockets
I don't think anyone bothered to socket it.. I really wouldn't bother.. Even things like the ACIS's, if they are known working and you dont place to swap them at any point, then just solder them in..
Re: dragmar's H5 rev. B1 build
Posted: 14 Feb 2021 14:50
by PaulJ
Don’t know if your OWC is soldered in but I wouldn’t use a socket for it. Every time I took the power supply out it would dislodge the OSC. I finally removed the socket and soldered in the OSC.