Page 1 of 3
NEW STORE ITEMS
Posted: 21 Jul 2020 21:48
by exxos
Thought I would start a thread of new items which are added to my store every now and then.
Currently the new item is the TC511001AP DRAM Is mostly used in some mega ST's
https://www.exxosforum.co.uk/atari/store2/#0185
As always, all these chips get tested before going into my stock. I think there is nothing worse In doing a RAM upgrade for it not to work and then you wonder if your soldering sucks, or the ICs are faulty.. At least if you buy from my store, you can be rest assured it is your soldering which sucks :lol:
- IMG_5431.JPG (54.6 KiB) Viewed 7060 times
Re: NEW STORE ITEMS
Posted: 21 Jul 2020 21:58
by exxos
- 3MPLCC44.jpg (3.2 KiB) Viewed 7053 times
PLCC44 SOCKETS. These are 3M branded not cheaper ones. I'm generally heading towards only stocking sockets which I know are reliable,
https://www.exxosforum.co.uk/atari/store2/#0186
I was in 2 minds if to sell these in packs of two or not as it would better value for people. Though it is a double-edged sword that most people will probably only want one socket anyway. Not really expecting these to be huge sellers, but as mentioned elsewhere, with me wanting to sell these sockets separately to kits, then people may buy them from my store just buy them elsewhere if they prefer.
Re: NEW STORE ITEMS
Posted: 21 Jul 2020 21:59
by exxos
- 34P_HEADER.jpg (4.61 KiB) Viewed 7053 times
FLOPPY PCB CONNECTOR 34 WAY
https://www.exxosforum.co.uk/atari/store2/#0022
Primarily used on the remake boards, but also can be used on originals
Re: NEW STORE ITEMS
Posted: 21 Jul 2020 22:02
by exxos
TOS206 ST decoder board.
- V1_PCB.jpg (15.16 KiB) Viewed 7052 times
https://www.exxosforum.co.uk/atari/store2/#0172
A compact TOS104 / TOS206 decoder board which can plug-in (or solder) into any existing 68000 socket. It also has the ability to have a socket on top for a CPU or accelerator.
NOTE : You will need a DUALTOS board & ROM to use this on a original ST machine. H4 boards only require the DUALTOS ROM.
Re: NEW STORE ITEMS
Posted: 21 Jul 2020 22:04
by exxos
- PGA_128_SOCKET_SM.jpg (15.44 KiB) Viewed 7052 times
PGA 128 PIN SOCKET
https://www.exxosforum.co.uk/atari/store2/#0181
NEW 3M PGA socket for 030 CPU. Sourced from reputable manufactures and not cheap sockets from China!
I only have a limited stock of these and will be unable to buy any more once my stocks are exhausted.
Re: NEW STORE ITEMS
Posted: 06 Aug 2020 15:21
by exxos
Jumper links
- short_jumper.JPG (3.23 KiB) Viewed 6912 times
https://www.exxosforum.co.uk/atari/store2/#0188
- tall_jumper.jpg (2.27 KiB) Viewed 6912 times
https://www.exxosforum.co.uk/atari/store2/#0189
030 RC CPU
- MC68030RC.jpg (6.9 KiB) Viewed 6912 times
https://www.exxosforum.co.uk/atari/store2/#0187
Re: NEW STORE ITEMS
Posted: 10 Sep 2020 20:36
by exxos
One thing which has been in the pipeline for very long time is replacement floppy drive belts...
These are now in stock.
https://www.exxosforum.co.uk/atari/store2/#0193
- IMG_5534.JPG (324.29 KiB) Viewed 6727 times
Re: NEW STORE ITEMS
Posted: 11 Sep 2020 13:38
by exxos
FUNKY PLCC68 used sockets.
- PLCC68_USED_ATARI.jpg (13.38 KiB) Viewed 6694 times
https://www.exxosforum.co.uk/atari/store2/#0195
2x22 2mm pin header IDE.
- 2x22header2mm.jpg (7.21 KiB) Viewed 6689 times
https://www.exxosforum.co.uk/atari/store2/#0196
Re: NEW STORE ITEMS
Posted: 07 Oct 2020 00:13
by exxos
A couple more new items in stock now.
50mhz 5v oscillators . these are getting harder to find so bulk brought a lot of them.
https://www.exxosforum.co.uk/atari/store2/#0201
74F257 as used on the STE
https://www.exxosforum.co.uk/atari/store2/#0202
Re: NEW STORE ITEMS
Posted: 03 Nov 2020 17:03
by exxos
Finally got a few cartridge pulls for my store. These have been in the
ultrasonic cleaner for about half an hour to clean up the contacts. I have tried to keep the pins straight as possible but will likely need a bit of tweaking and cleaning up of residual solder etc
https://www.exxosforum.co.uk/atari/store2/#0203
- IMG_5751.JPG (350.75 KiB) Viewed 5728 times