Page 1 of 1

GoEx Flashfloppy in TT installation pictures

Posted: 14 May 2020 20:11
by Steve
Hi all,

Just installed the GoEx in my TT and wanted to share some photos so others can see how it fits. This would be the same on a MegaSTE too. Normally the TT has a large metal floppy base mount, I didn't want to put this back in for space reasons so I used zip-ties instead. The zip ties hold it perfectly, a very neat solution! I then decided that my ideal place for the OLED display was just below the HDD bay. Using a little file it was easy to make a small recess for the cable to fit through nicely.

I was surprised how easy it is to use, I downloaded the blank floppy file from Rubber jonnhys excellent guide ( https://www.exxosforum.co.uk/forum/viewt ... f=12&t=593 ) put it on a fat32 formatted SD card, and the Flashfloppy picked it up automatically and I can easily read and write directly to this image, brilliant! For me the Flashfloppy is good for two things: Removing the ageing mechanical drive and having utility discs easily available in TOS without requiring any drivers; so in the event of a HDD crash I can easily recover and fix problems.

IMG_20200514_171627.jpg
IMG_20200514_175640.jpg
IMG_20200514_181141.jpg
IMG_20200514_181843.jpg

Re: GoEx Flashfloppy in TT installation pictures

Posted: 14 May 2020 20:17
by DoG
Ooooh. Really nice and clean. Looks great.

Re: GoEx Flashfloppy in TT installation pictures

Posted: 15 May 2020 12:01
by ari.tao
Thanx a lot for report & pictures & link.
I ordered a GOEX 10 days ago, will hopefully arrive soon.

Re: GoEx Flashfloppy in TT installation pictures

Posted: 15 May 2020 17:47
by rubber_jonnie
Will look nice in a Mega STE 😁

Re: GoEx Flashfloppy in TT installation pictures

Posted: 19 May 2020 07:08
by Tomswork
Has anyone seen the long button bezel for the goex

Tom

Re: GoEx Flashfloppy in TT installation pictures

Posted: 16 Oct 2020 16:56
by MonoJono
Hi I have a long and a short goex - they work great. Not having to saw holes in the side of the case is always nice, and using a SD cards rather than a USB dongles just keep everything really clean. Can't recommend them highly enough. I also have a second long goex inside an old broken SF354's case which needed a couple of mm's filing from a the bezel on the sharp corner to fit but looks great, but still need to sort the wiring out for that to work as an external floppy drive.

Re: GoEx Flashfloppy in TT installation pictures

Posted: 16 Oct 2020 17:05
by PhilC
Nice, been thinking if putting one in one of my Megas

Re: GoEx Flashfloppy in TT installation pictures

Posted: 17 Oct 2020 06:09
by sporniket
What I like in the GOEX is the attention to the detail : having designed a front insert that integrate to the special shape of the cutout for the disk drive. It's in my shopping list for next year.