Page 1 of 1

TF536 memory source

Posted: 08 May 2020 14:28
by Homer79
Hi,

Im wary of Chinese electronic vendors, but I've been ordering parts from here, touch wood so far I've not had issues with there components.

https://lcsc.com/product-detail/SDRAM_M ... 26393.html

Wishing for people to get decent prices, is this the correct memory?

Regards

Re: TF536 memory source

Posted: 08 May 2020 14:40
by PaulJ_2.0
LCSC have been 100% for me on everything ordered from there.
Nice find :)

Re: TF536 memory source

Posted: 08 May 2020 14:43
by alenppc
Homer79 wrote: 08 May 2020 14:28 Hi,

Im wary of Chinese electronic vendors, but I've been ordering parts from here, touch wood so far I've not had issues with there components.

https://lcsc.com/product-detail/SDRAM_M ... 26393.html

Wishing for people to get decent prices, is this the correct memory?

Regards
That does seem like the right memory, but i suggest getting it from Mouser instead. The price difference is small.

Re: TF536 memory source

Posted: 08 May 2020 16:53
by PhilC
Just looking through all these old simms I have and so far I have a few likely suspects.

@terriblefire Could you fit less ram to the TF536, for instance if you had the 32mb variants of the above would 32mb work without problem?

Re: TF536 memory source

Posted: 08 May 2020 16:59
by terriblefire
PhilC wrote: 08 May 2020 16:53 Just looking through all these old simms I have and so far I have a few likely suspects.

@terriblefire Could you fit less ram to the TF536, for instance if you had the 32mb variants of the above would 32mb work without problem?
Yes the final version of the firmware will support that.

Re: TF536 memory source

Posted: 08 May 2020 17:01
by PhilC
Thanks for confirming @terriblefire I may try it on one of the boards as well as 128mb on another.

Re: TF536 memory source

Posted: 09 May 2020 13:17
by Danoo
@8 Bit Dreams mentioned in another thread he used SAMSUNG K4S561632-UC75 and it worked fine. These were marginally cheaper than
the MT48LC16M16A2P-6A:G. Have ordered both will see how the SAMSUNG goes.