Page 1 of 1
TF534 Firmware request
Posted: 26 May 2019 19:49
by 8 Bit Dreams
Hi Stphen,
may i kindly ask You to send me a TF534 firmware WITHOUT INT2 workaround?
wanna use old good method with INT2 wire, because IDE speed is much higher then..
Thank You
Re: TF534 Firmware request
Posted: 26 May 2019 21:19
by terriblefire
There is a 100ns per block difference in speed. Its virtually unnoticeable.
Re: TF534 Firmware request
Posted: 27 May 2019 10:03
by terriblefire
i looked at the code. Just connect the INT2 wire and you have what you want. It only takes the INTREQR patch path when the values differ.
Re: TF534 Firmware request
Posted: 27 May 2019 16:02
by 8 Bit Dreams
Oh thanks! Will try and report
Re: TF534 Firmware request
Posted: 01 Jun 2019 17:45
by chue
I was curious and hooked up INT2 just to see what would happen. Note this is on the February 2019 firmware (r2c).
With INT2 hooked up, the IDE speed didn't make a difference on my machine - SysInfo showed 1.1 MB/s with and without.
With INT2 I did get incredible results on AIBB - 700 times A600 speed. Unfortunately that's probably a bug :). Also Frontier froze on the intro.