Page 1 of 1
TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: 09 Aug 2018 06:39
by Steve
Using stock TT 16 Med as the benchmark comparison.
IMG_20180809_150911.jpg
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: 09 Aug 2018 08:17
by stephen_usher
What sort of RAM are you using in your Storm? Does it have fast page mode enabled?
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: 09 Aug 2018 09:11
by Steve
Ah yes sorry, forgot to say. I am using Kingston ram with FPM and EDO burst enabled.
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: 11 Aug 2018 00:36
by Icky
Snap:
Same config but with 256MB Ram and FPU overclock
Question - does your TT have the VME patch?
IMG_2964.JPG
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: 11 Aug 2018 03:46
by Steve
I spoke to Atarian Computing (josh) and he thinks mine has the vme patch done on the pcb in the factory. I implemented a fix where the factory oscillator mod was incorrect, following Josh's instructions, everything seems to work well.
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: 11 Aug 2018 12:38
by frank.lukas
Atari Mega ST1 with 4MB ST Ram, 8Mhz Board Clock, PAK68/3 with 68030-50Mhz /68882-50Mhz -32kB L2 Cache, FRAK/2 with 64MB TT Fastram, Panther/2 with NE2000 ISA Ethernet card (MiNT Driver) and a ATI MACH32 2MB ISA Videocard.
To Speedup I looking for a MACH64 ISA Graphiccard and set up the Boardclock to 10,12 or 16Mhz ...
GB630PAK.gif