exxos's Atari, Amiga & retro forum

I burned these two guys on to ROMS...

http://web.archive.org/web/200710200854 ... d_v2_3.BIN
http://web.archive.org/web/200710200855 ... n_v2_3.BIN

And booted the badger with the original 68K in. I got an "insert floppy" logo.. Kickstart 1.3 (same deal with Kick 3.1)

I verified the ROMs did burn by reading them back and md5suming them..
V. Odd.

This means extended roms are not detected

This is a bit perplexing.. I can see the ROMs are there with DiagROM. :/

Is there a tool to dump the extended roms from workbench?

http://aminet.net/package/util/misc/RipROM

I haven't tested it, but it is still supported by airsoft.

http://www.airsoftsoftwair.com/

Thanks. That worked.

Its let me diagnose that the ROMs only wrote to the half way point. :/

https://www.dropbox.com/s/2ti6211sq5g2nby/cdtv.rip?dl=0

after 0xF20000 the rom is garbage from the system view. I'll pull the rom back out and test it with the programmer tomorrow

Do i just have incompatible ROMS? These are Hitachi MX27C512-12s

Ok its simple.. ROMs are the wrong size. Oooops.

This is parked for a bit. I need ROMs, a keyboard and mouse.

terriblefire wrote: 22 Feb 2019 13:36 This is parked for a bit. I need ROMs, a keyboard and mouse.

I might be wrong but I sort of remember the CDTV keyboard being just a black version of the 2000,3000,4000 keyboard.

Didnt you get an A3000 recently?

Forgottenmyname wrote: 22 Feb 2019 14:13 I might be wrong but I sort of remember the CDTV keyboard being just a black version of the 2000,3000,4000 keyboard.

Didnt you get an A3000 recently?

Different connector.. CDTV Keyboards are v rate. £150+ for a keyboard.

I dont have an A3000 keyboard either.