We welcome retro users & hardware gurus alike! Come and join the party :)
https://www.exxosforum.co.uk/forum/
Yes, exactly the ones I have on my PiStorm. Worked fine.mrbombermillzy wrote: 11 Aug 2026 17:58Im going to order a Pistorm as soon as I can confirm if the LVC16373A chips work ok on the ST? (Sorry, but couldnt find any info about this on Github).
Well, over the weekend & with a _lot_ of support & guidance from @rubber_jonnie :thanksblue: I finally got the PiStorm plus a Pi Zero2W running inside my rev 5 A500.JezC wrote: 23 Jul 2026 16:34 Will try it in my H4 first ...bits have finally arrived.
Bit low on motivation today but hopefully over the weekend...first to test it all works in an Amiga A500, then move it into the Atari from there.
Baby steps...
Pleased to hear its running well and happy to help as best I can.JezC wrote: 19 Aug 2026 21:02Well, over the weekend & with a _lot_ of support & guidance from @rubber_jonnie :thanksblue: I finally got the PiStorm plus a Pi Zero2W running inside my rev 5 A500.JezC wrote: 23 Jul 2026 16:34 Will try it in my H4 first ...bits have finally arrived.
Bit low on motivation today but hopefully over the weekend...first to test it all works in an Amiga A500, then move it into the Atari from there.
Baby steps...
I'll post a fuller write-up of that (so I can find it again in the future! :roll: ) in another topic later, but suffice to say I do now havve a working PiStorm adapter at last.
So, time for me to go away and start doing some background reading before I waste everyone's time with daft questions about getting it all to work in the ST remake!
Hopefully that will get done before the kids need taking back to university at the end of September/early October...
:D
So is that going to be another job for me ;)mrbombermillzy wrote: 20 Aug 2026 15:05 Good stuff @JezC
Im right behind you. (My PiStorm board is being built/tested ATM, so it may be a while before I get it). :roll:
I hope not Jon! :lol:rubber_jonnie wrote: 20 Aug 2026 16:08So is that going to be another job for me ;)mrbombermillzy wrote: 20 Aug 2026 15:05 Good stuff @JezC
Im right behind you. (My PiStorm board is being built/tested ATM, so it may be a while before I get it). :roll:
Roger dodger :)mrbombermillzy wrote: 20 Aug 2026 16:38I hope not Jon! :lol:
AFAIW, its just a CPU pull; One of my MSTs has socketed 68000, the other has a very delicate looking custom CPU placement on top of extension pins, with the blitter patch applied underneath . :) Im not sure I want to start pulling on that, so will probably use one of the STs I got from Phil (either the 520ST with TF536, or the STFM cased H5 as the donor).
The board is still in its assembly stage (then QA), so Im not sure how long before it arrives here.