exxos's Atari, Amiga & retro forum

TotO wrote: 05 May 2023 09:32 Are you ardering the PCB with the CPLD, RAM and FLASH memories already assembled?

It's complete aside from the CPU and fpu. Though they can be supplied also.

exxos wrote: 05 May 2023 09:41It's complete aside from the CPU and fpu. Though they can be supplied also.

I mean, the factory solder all the SMD parts? (provided by them or you)

TotO wrote: 05 May 2023 09:57

exxos wrote: 05 May 2023 09:41It's complete aside from the CPU and fpu. Though they can be supplied also.

I mean, the factory solder all the SMD parts? (provided by them or you)

All parts soldered at factory.

exxos wrote: 05 May 2023 09:04

Rustynutt wrote: 05 May 2023 08:37 Will/can you supply these with thru headers? It's a pain to add them after the fact, one handed, blind in one eye... :)
Have a Nova, Expose and Falcon Speed I'd like to play with.

There is no through capability on these boards.

Thanks!
Unterseite it is :)

... there are wirewarp 13mm VG DIN 41612 64pin strips that can be modified/adapted. as with the StromTT and Thunder cards for the Atari TT where the pins look out of the top of the board to put the next board in.

Hi There,
I am also extremely interested in purchasing an assembled DFB1X, as long as the price isn't too crazy. Thank you so much for your hard work on this simple but effective upgrade - the idea of being able to properly use Multi-TOS / Magi!C Falcon without slapping in an 060 based accelerator really appeals.

frank.lukas wrote: 05 May 2023 22:19 ... there are wirewarp 13mm VG DIN 41612 64pin strips that can be modified/adapted. as with the StromTT and Thunder cards for the Atari TT where the pins look out of the top of the board to put the next board in.

Thanks Frank. Some years back found these to use with Mighty Sonic and Afterburner. With the cover off is no problem. Expose can set on AB, and Falcon Speed or NOVA can connect with ribbon cable. Sure, signal is no problem.
This is kind of what I asked you about a PCB so ribbon wasn't necessary.

On the CT picture, use these for testing with SuperVidel. A bitch to remove!

@exxos I'm also interested in a fully build one with cpu/fpu.

Added :)

Looks like I may have to start either a second batch buyers list or get more made. I'm a bit reluctant to get more made at this point due to the costs of it all etc

I'm interested in a fully built one I have soo many half built projects already lol don't need to add another :)