Page 4 of 5
Re: Arek's TF534 build
Posted: 17 Sep 2019 16:12
by terriblefire
What you’re seeing sounds like you have the clock jumper on the wrong setting?
Re: Arek's TF534 build
Posted: 17 Sep 2019 16:19
by arkadiusz.makarenko
I got it set up wrong!
I don't get any output at all on other setting. :(
Re: Arek's TF534 build
Posted: 17 Sep 2019 18:00
by arkadiusz.makarenko
Ok. Ordered CPU and 33 MHz oscillator. I hope this will solve my mystery.
Re: Arek's TF534 build
Posted: 17 Sep 2019 18:38
by PaulJ_2.0
Maybe post a clear pic of your board, maybe one of us can spot something amiss?
Re: Arek's TF534 build
Posted: 17 Sep 2019 19:21
by arkadiusz.makarenko
It starts at 7mhz but doesn't at 40mhz.
CPU is unknown, so I assume it may be bad. I will get tested CPU in 2 days, and 33mhz oscillator.
Re: Arek's TF534 build
Posted: 17 Sep 2019 19:55
by arkadiusz.makarenko
Yeyeyyeyeye!! Got it boot Diagrom. It was fu*king oscillator. It runs at 50mhz!
Re: Arek's TF534 build
Posted: 17 Sep 2019 20:08
by PhilC
arkadiusz.makarenko wrote: 17 Sep 2019 19:55
Yeyeyyeyeye!! Got it boot Diagrom. It was fu*king oscillator. It runs at 50mhz!
Well done.
Dodgy oscillator choice or just a duff one?
Re: Arek's TF534 build
Posted: 17 Sep 2019 20:16
by arkadiusz.makarenko
PhilC wrote: 17 Sep 2019 20:08
arkadiusz.makarenko wrote: 17 Sep 2019 19:55
Yeyeyyeyeye!! Got it boot Diagrom. It was fu*king oscillator. It runs at 50mhz!
Well done.
Dodgy oscillator choice or just a duff one?
Genuine source. I had to kill it somehow.
Re: Arek's TF534 build
Posted: 17 Sep 2019 20:23
by PhilC
At least it's fixed and 50mhz at that, well done.
Re: Arek's TF534 build
Posted: 17 Sep 2019 20:30
by arkadiusz.makarenko
It appears that there is still ram issue but this can be sorted. :)