supaduper wrote: 20 Nov 2018 20:16
That`s a good price Alen for the DB23 pin but unfortunately they only ship within Canada
Do they? Ok, in case of shortage I can help distribute these. There will be a bit of overhead due to shipping+customs but it should be able to beat the ebay scalpers.
Re: The TF330 is here
Posted: 20 Nov 2018 21:35
by terriblefire
Build photos
05C96F80-704F-4E8B-BFC2-378AEEC2DE7D.jpeg
0181CC4A-5AE8-463D-AE54-84F8520B4047.jpeg
Re: The TF330 is here
Posted: 20 Nov 2018 22:03
by terriblefire
Quick note to remember to put the resistor networks on before the 030 socket.
Re: The TF330 is here
Posted: 21 Nov 2018 05:50
by 8 Bit Dreams
:shock: it's here!!!
And? How it goes? Is it working ?
Oh..i see, there is no oscillator on it yet..
Re: The TF330 is here
Posted: 21 Nov 2018 08:01
by terriblefire
There are a lot of things I need to check. The ram and the 100Mhz crystal is last on the list to add. Will be a week before I get this up and running. First thing I need to do is check I can disable the onboard cpu properly
Re: The TF330 is here
Posted: 21 Nov 2018 09:11
by 8 Bit Dreams
Some old (A2k) accelerator cards have "Boss" jumper on them, shorting it onboard CPU gets disabled, don't know how it is routed though.. :oops:
Re: The TF330 is here
Posted: 21 Nov 2018 10:19
by terriblefire
The solution I need is either to hold HALT low forever or BG low forever. I don’t know which will work on the CD32 because it depends what else is wired to those lines.
I have a plan. I just need to run through it
Re: The TF330 is here
Posted: 21 Nov 2018 19:00
by terriblefire
Just booted the 030 at 14mhz. No ram or IDE yet.
Good news is no patches are needed for my 020 turn off mode. Yay.