The Atari joystick/mouse port. I was fortunate enough that one of the footprint of a regular DE-9 port has the mounting hole at the right position. I duplicated it and added a non plated, ovale, hole.
Capture d’écran du 2023-06-07 23-27-41.png
Re: Sporniket's log on hardware stuff
Posted: 08 Jun 2023 14:01
by Darklord
Always fascinating to watch your progress. :)
Re: Sporniket's log on hardware stuff
Posted: 08 Jun 2023 16:35
by sporniket
Thanks.
I try to stay focused on only a few projects, that's the only way for me to reach my goal. For the ST, I have to create 2-3 more custom footprints, and then I can finally move on the PCB.
Re: Sporniket's log on hardware stuff
Posted: 29 Jun 2023 08:34
by sporniket
Today's little session
Re: Sporniket's log on hardware stuff
Posted: 29 Jun 2023 17:00
by Darklord
You should have put audio in - we'd all love to hear your lovely singing voice! :)
Re: Sporniket's log on hardware stuff
Posted: 29 Jun 2023 21:32
by sporniket
hé hé :D, if I added a sound track, and more than sound, some comments, it would take too much time to edit. And I am more at ease at writing things.
Finally, I just capture my work session and upload it right away and voilà ! done. A workflow with minimized friction.
Re: Sporniket's log on hardware stuff
Posted: 30 Jun 2023 21:22
by Darklord
Good enough, I reckon. :)
Re: Sporniket's log on hardware stuff
Posted: 03 Aug 2023 21:32
by sporniket
A very very small progress since last time, today I felt motivated enough to check the wiring of the resistors networks (last time, I realized that contrary to my expectations of 8 bussed resistors, they are in fact 9 bussed resistors). I first checked the original schematics, as it were oddly (to me) using the pin #10 for some of them, and then confirmed with the actual board.
It's good for now, until I find something else. The github repository is up to date.