exxos's Atari, Amiga & retro forum

Yeah he is working on a card. talked to him and I am supposed to be ableto test it. but not heard nything more in a while

I've not seen any other cards around apart from the rtg by matze, the zz9000 and chuckys a3660 that's why I asked if there was any tf planned for the 3k & 4k

I'm quite tempted to buy the zz9000 as it has a few features built in to one card (rtg,ethernet,usb and a scandoubler)

My wish list for an accelerator would be 060 , big ram and faster ide all on one board .

Ps I do have a card kel connector that I bought a while ago waiting for some solder and a tf pcb!!

Thanks terriblefire for your past and future work !!

Well who knows i might find time during armagedon.

Matthias got pcb's recently (delayed due Corona),
testing phase should begin v. soon..

Planned Features are:
68040/060 25/50/75/100 Mhz, maybe 37,5 & 125 also?!?
5V-Cooling fan pins
DC/DC-Module on pcb
512k F0-ROM
128MB SD-RAM with Move-Multiple-Bursts
Autoconfig (CPU-Space)
DMA-capable for SCSI-Controller on A3000(T)/4000T
I2C - Temperature sensor output

Its a heck of lot of work to get DMA going just so the SCSI controller can DMA into RAM. Personally dont think its worth it but its not my board.

heh, well, i appreciate it either way. anything to make the A3k scsi not as slow as the A4k IDE is very welcome.

this is all great news

it is interesting seeing you guys put these boards together and hearing about the little tweaks and seeing challenges you've faced along the way. i've learnt a lot so far myself.

be it this board from Matze, or a TF3000/4000, chalk me down for at least one or even two! i have some 060's that have been begging for a good home, and the Commodore A3640 board SUCKS. see other forums :lol:

You will need your 060's very soon, trust me! ;)

terriblefire wrote: 18 Mar 2020 20:56 Its a heck of lot of work to get DMA going just so the SCSI controller can DMA into RAM. Personally dont think its worth it but its not my board.

Overengineered as usual :) That's why I'd love to get some good TF4060 port of the 360/1260

Let me clear the decks then it’s next

Ok so update...

I'm sick in bed with a cold and i've run out of netflix so i'm routing boards.

1. TF536 rev 2 is done and ordered.
2. TF360 rev 2 is done and ordered.

Next...

3. CD32 Riser updates....
4. TF1260 review.

if we stay in lockdown for ages i'll do a TF4060. I'd generally recommend Matze's 3000 card though. MIne is going to be a fever driven port of the TF360.