exxos's Atari, Amiga & retro forum

exxos wrote: 28 Oct 2018 22:05 No 80pin SMT in these machines :roll:


IMG_20181027_121958.jpg

Whoa. :) Isn't one of them an STE? I've been searching for a reasonably priced cover for STE for years. :-/

mikro wrote: 29 Oct 2018 11:01 Whoa. :) Isn't one of them an STE? I've been searching for a reasonably priced cover for STE for years. :-/

I've got STE's I think there.. maybe some here... Mostly all my machines have missing PSU and floppy drives though. Never get time to really refurb them or anything. No idea what the going rates for machines is these days ? I stopped buying them a while ago when prices started getting near £100 a machine :roll: I really need to sort all this crap out at some point :roll:

PCBs arrived for the MMU version :)

Will try and find some time to build one of these up over the next week or so..

exxos wrote: 22 Nov 2018 12:48 PCBs arrived for the MMU version :)

Will try and find some time to build one of these up over the next week or so..

adpt.jpg

Nice. You have been doing a lot of soldering lately Exxos.

troed wrote: 26 Oct 2018 22:12

exxos wrote: 26 Oct 2018 19:43 Dang it...

The 80 pin pinout doesn't list the GND connections :roll:

Does anyone have a board they can check ??? I don't seem to have one :(

Sorry, just switched out my last SMT board last weekend :(

I lied. The doubleST machine is SMT ... :) Still needed?

troed wrote: 22 Nov 2018 21:44 I lied. The doubleST machine is SMT ... :) Still needed?

oh sweet! yes, I still need to know the GND connections for the GLUE I think it was...

Icky wrote: 22 Nov 2018 13:11 Nice. You have been doing a lot of soldering lately Exxos.

I know, gave myself some time off work the past week or so. Not much hand soldering so fingers doing OK for now.. :)

exxos wrote: 22 Nov 2018 22:02

troed wrote: 22 Nov 2018 21:44 I lied. The doubleST machine is SMT ... :) Still needed?

oh sweet! yes, I still need to know the GND connections for the GLUE I think it was...

Done :)

https://www.exxosforum.co.uk/forum/viewt ... 469#p14469

If anyone wants a simple soldering project and good with SMT stuff.. I'm just are not getting around to soldering this adapter up.. I can send a PCB + chip & pins to who can build one up to try it...

I still need to work on the GLUE adapter yet as well, not started the lib yet..

Once (ultimately) both are tested, I may look to including the footprint on the mongrel (as intended) or doing some form of funky plug in expansion board which will have both chips on a plug in board.. idea being the PLCC will still be on the board, put will have headers over them to plug in a SMT adapter board.

It may be better having them as a plug in board anyway with the intention of them being replaced with FPGA "one day".

Reason is there are LOTs of SMT GLUE and MMU about.. PLCC are rocking horse shyte these days.,, plus I hope the SMT will overclock better with them being later production runs.

I don't mind having a go exxos, as long as you don't need the results in a hurry (work is busy at the moment and the wife has me decorating )