Page 2 of 2
Re: Building a PAK030
Posted: 18 Jun 2025 18:12
by frank.lukas
No, I don't have any boards. I got the two adapters from the German Atari forum. Ask Pakman. I'd have to create a layout in Eagle ...
Post it ->
https://forum.atari-home.de/index.php/t ... #msg272677
The circuit boards are difficult to solder because you have to cut off the pins under the chips and solder them from below, which is difficult.
Re: Building a PAK030
Posted: 18 Jun 2025 18:57
by PhilC
bbisi wrote: 18 Jun 2025 17:49
hallo Frank
Hast du noch solch eine Platine
bestücken würde ich mit meinen IDT71B74S20Y
Oder nur das Platinen Layout
Grüße
It's possible I may have some. Is that the specific part number of the chip you require?
Re: Building a PAK030
Posted: 18 Jun 2025 21:49
by frank.lukas
bbisi wrote: 18 Jun 2025 17:49
hallo Frank
Hast du noch solch eine Platine
bestücken würde ich mit meinen IDT71B74S20Y
Oder nur das Platinen Layout
Grüße
https://github.com/zxshock/PAK68_tagram_soj-dil
Re: Building a PAK030
Posted: 29 Jun 2025 21:43
by bbisi
Danke für die Hilfe
Habe gerade 3 Stück aus China bestellt
Sollen übermorgen kommen
Gruß
Re: Building a PAK030
Posted: 29 Jun 2025 21:47
by bbisi
Danke für die Hilfe
Habe gerade 3 Tag Rams MK48S74N20 aus China bestellt
Sollen übermorgen kommen
Gruß
Re: Building a PAK030
Posted: 29 Jun 2025 21:55
by exxos
@bbisi Please note this is a English only forum thanks :)
Re: Building a PAK030
Posted: 30 Jun 2025 07:44
by bbisi
Thanks for the help.
I just ordered 3 RAMs MK48S74N20 from China.
Should arrive the day after tomorrow.
Excuse me for German translation
I am not good in english
greetings