Page 2 of 2
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 19:42
by exxos
woohoo! Found them!
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 21:13
by exxos
They never seem to look properly soldered to me :shrug:
EDIT: and they not! :roll: back on the heater for a bit.. stupid chips...
1.jpg
2.jpg
EDIT2:
Looking better now!
3.jpg
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 22:04
by exxos
So either my soldering sucks (probably) or this thing is wired up wrong (also probably)..
Someone else's turn now... :twisted:
IMG_3982.JPG
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 22:20
by PhilC
Might just be the photo but looks like theres some solder bridges on the left hand side
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 22:37
by exxos
PhilC wrote: 12 Apr 2019 22:20
Might just be the photo but looks like theres some solder bridges on the left hand side
It's a trick of the light.. The flux is making it look that way..
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 22:41
by exxos
The board is a burnt molten mess.. But it is now working :dualthumbup:
IMG_3983.JPG
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 22:46
by PhilC
Only slightly scorched.
Well done
Re: GLUE SMT ADAPTERS - WIP
Posted: 12 Apr 2019 22:59
by exxos
I don't think all the pins were level on that chip :( Will have another go on Monday :)