Page 1 of 1
C070523-001 REV.D
Posted: 23 Jun 2018 16:49
by troed
C070523-001 REV.D top.JPG
C070523-001 REV.D bottom.JPG
(After market upgraded to TOS 1.04 by an official reseller)
Re: C070523-001 REV.D
Posted: 05 Sep 2018 21:03
by tzok
1040STF C070523-001 REV.D 1987
1040STF C070523-001 REV.D.jpg
Re: C070523-001 REV.D
Posted: 04 Dec 2020 23:50
by sporniket
520 STF C070523-001 REV.D
G-AV-0 4686
DSC_0973.JPG
Re: C070523-001 REV.D
Posted: 01 Jun 2021 21:41
by sporniket
Before dismantling my donor machine, I did a series of shots
like i did for my STE. Two big capacitors was hiding other components or marking, I had to make some close-up shots for them.
Anyway it should help spotting some of the components and their values.
c070523-001-D-100.jpg
c070523-001-D-101.jpg
c070523-001-D-102.jpg
c070523-001-D-103.jpg
c070523-001-D-200.jpg
c070523-001-D-200b.jpg
c070523-001-D-200c.jpg
c070523-001-D-201.jpg
c070523-001-D-202.jpg
c070523-001-D-300.jpg
c070523-001-D-300b.jpg
c070523-001-D-301.jpg
c070523-001-D-302.jpg
Re: C070523-001 REV.D
Posted: 07 Feb 2022 02:21
by stween
Couple of quick shots from the STF I picked up in the last week. I've since cleaned the case, but the board itself came pretty clean! Probably no more detailed photos are necessary, unless there's merit in taking them.
PXL_20220206_154913537.jpg
Mainly noticed on mine that one of the TOS 1.0 ROMs has been swapped out at some point?
PXL_20220206_154830033.jpg
Also, I'm curious: the chunky capacitor around JP4/5 and the RAM banks is hooked up differently on some boards. Why?