ATARI ST/F/M 4MB RAM UPGRADE (0035) 2025 batch
Posted: 08 Aug 2025 11:11
- 4MBMMU.jpg (126.57 KiB) Viewed 2010 times
INSTALL PAGE
https://www.exxoshost.co.uk/atari/last/4MBMMU/index.htm
STORE LINK
https://www.exxosforum.co.uk/atari/store2/#0035
As mentioned in my blog HERE, There is a new small batch of 4MB MMU RAM boards being produced.
During my testing I have seen that its probably not apparent that people are supposed to fit this board level and if they try and push it totally flushed, the right-hand side of the MMU adapter board (under the connector) having no pins, will push down further than the left-hand side causing a wonky insertion than can cause contact problems.
In order to address this problem I have designed a spacer which can simply be put on top of the MMU which will prevent the board from being inserted at an "unnatural angle".
- IMG_3602.JPG (290.95 KiB) Viewed 2010 times
These spacers will be included from the current batch onwards (August 2025).