Page 1 of 2
3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 04:13
by Chris O.
Hi all...
I am in the process of designing 3D printed faceplate for Exxos Sony MPF920 floppy drive 1.44MB replacement.
Modular design hopefully easier to modify for different drives.
Needs two small screws for Eject button M1.7 * 6mm.
Note:
Only tested on Atari 1040 STe case and MPF920 Z/161 SEP2005.
PXL_20250401_024137721.jpg
3D SONY F HD.png
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 04:24
by Chris O.
Pic Eject button installed.
PXL_20250331_212501423.jpg
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 04:52
by Chris O.
I will be posting all the 3D files as soon as I verify fitment but it's looking promising so far.
PXL_20250401_034518221.jpg
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 05:28
by Chris O.
Extra info on the Eject button screws (M1.7*6) 2pcs.
PXL_20250401_041959858.jpg
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 06:25
by Chris O.
So I need to adjust the thickness of the spacer or print one more (Need extra clearance for floppy disk with old labels).
STE FHD F3.jpg
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 08:22
by PhilC
Looking good so far @Chris O.
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 01 Apr 2025 16:08
by Badwolf
Very nice to have!
BW
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 02 Apr 2025 01:03
by Chris O.
Thanks.
Just got back from work let's see if I can test this 1mm spacer quickly.
PETG.
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 02 Apr 2025 02:17
by Chris O.
So I used 1.5mm spacer on my Atari ST/e case.
Bottom of the Atari ST/e case flush with the front flat part of the faceplate. :D
Re: 3D ST/e face plate - SONY MPF920 1.44/720k FLOPPY DRIVE
Posted: 02 Apr 2025 02:26
by Chris O.
All files including stl + obj + rsdocx ;)
TODO: Door, Dust Cover Assembly....