Page 1 of 13
I've been Coleco'd
Posted: 28 Sep 2024 12:45
by rubber_jonnie
The Colecovison has happily arrived 😁
Initial look suggests it may have been in a damp environment, one of the carts doesn't look great with rusty screws, but the unit itself seems in decent condition externally.
IMG20240928123631.jpg
IMG20240928123909.jpg
IMG20240928123637.jpg
As you can see, Oliver the product inspector has been diligently checking things out.
I should be able to use any 9 pin sticks with it as there are no controllers and I need to figure out a PSU, but I think it's going to be a a good project.
Need to figure out composite and audio out too.
Still, it was the cheapest one I could find on ebay.
Stay tuned...
Re: I've been Coleco'd
Posted: 28 Sep 2024 12:53
by HigashiJun
Wow, I had this one back in the 80's !
If I remember correctly, I swapped it for a ZX Spectrum (or was it the ZX Spectrum swapped for the Colecovision ?)...
My cat was not really interested in it, though.
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:07
by stephen_usher
:yay: :yay2: :dualthumbup: :cheer:
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:12
by rubber_jonnie
HigashiJun wrote: 28 Sep 2024 12:53
Wow, I had this one back in the 80's !
If I remember correctly, I swapped it for a ZX Spectrum (or was it the ZX Spectrum swapped for the Colecovision ?)...
My cat was not really interested in it, though.
Didn't even have a 2600 myself, started off with a ZX81, so these are new things to me.
Trying to get a decent collection of consoles of this era, will go nice with the 2600/7800 I have plus the intellivision.
Here's a closer look:
IMG20240928130731.jpg
Time to crack it open and see just what I've let myself in for!
Carts came up OK, just bad labels and a couple of replacement screws :
IMG20240928125513.jpg
IMG20240928130341.jpg
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:20
by HigashiJun
@rubber_jonnie
But wait, where are the controllers ?
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:23
by rubber_jonnie
Eeek!
IMG20240928132207.jpg
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:25
by rubber_jonnie
HigashiJun wrote: 28 Sep 2024 13:20
@rubber_jonnie
But wait, where are the controllers ?
I mentioned in the original post, it doesn't have any, but not the end of the world.
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:28
by HigashiJun
:oops:
Ok, saw the line I missed...
Is a set of controllers easy to find ?
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:33
by rubber_jonnie
HigashiJun wrote: 28 Sep 2024 13:28
:oops:
Ok, saw the line I missed...
Is a set of controllers easy to find ?
They use standard 9 pin controller plugs, so from what I have read they will work with standard Atari joysticks or the 2 button ones.
Not 100% ideal but a start. I'm watching one on ebay atm.
Re: I've been Coleco'd
Posted: 28 Sep 2024 13:35
by rubber_jonnie
Not so bad under the RF shield:
IMG20240928133058.jpg