exxos's Atari, Amiga & retro forum

Seeing as the parts for a PiStorm system will be arriving this week I thought I'd create a new blog thread.

I'll be aiming to use my CPU switchable machine and once I have something stable I'll design a PiStorm board which better fits the ST and my relocator. It's quite possible I'll be able to design it so that the keyboard and case top can be installed.

Sounds great!

Eagerly awaiting the updates already;)

Im all for more Atari PiStorm pioneers and research Stephen!

Can you tell us what Pi model/version you are going to use?

If you want to minimise any potential issues, I highly recommend a Pi4. That with the combination of 374 latches on Exxos's pistorm version will give you the most mileage. It's the most successful combination. For some reason Pi3 doesn't seem as stable across a number of systems.

Yeah, I have a Pi4 1GB on the way. I'll be fitting a right-angled socket on the PiStorm board so that the Pi will sit vertically initially for better convection cooling. If/when I produce my own PiStorm adapter board I'll have the Pi sitting next to it using two right-angle connectors. The ST has more horizontal space than vertical, unlike the Amiga A500.

So IIRC from these PiStorm threads, a Pi5 is also not suitable?

@mrbombermillzy can't use a pi5 at all, it has much slower gpio performance.

Thanks Steve. :)

The work area is ready and the system (still with the TF536) tested and working.

OK. PiHut say they've shipped it (in an e-mail from 10:30am) but Royal Mail are saying that they're waiting for the parcel. Hmm.. Probably no Pi4 tomorrow then.

P.S. Just got an e-mail from Royal Mail... It'll be delivered tomorrow after all.