Page 1 of 1
Mitsumi cap kit question
Posted: 27 Mar 2024 18:55
by Groppo91
I have purchased the cap kit and one of the diodes says replace right hand side but I am unsure is this right hand as in how it site in the atari or right hand from looking at it from the switch and socket? The only reason I ask is that I cant see the wording HRW34 on either of the heatsink diodes.
STPS10H100CFP - replaces the output diode pack HRW34 (right side heatsink)
IMG_20240327_184140.jpg
IMG_20240327_184127.jpg
IMG_20240327_184154.jpg
Re: Mitsumi cap kit question
Posted: 27 Mar 2024 22:05
by exxos
Your last image, on the right. Its the part closest to the PSU connector which goes to the motherboard. The low voltage side.
Also please see
this post on how to correctly upload images to the forum thanks.
Re: Mitsumi cap kit question
Posted: 28 Mar 2024 07:26
by Groppo91
exxos wrote: 27 Mar 2024 22:05
Your last image, on the right. Its the part closest to the PSU connector which goes to the motherboard. The low voltage side.
Also please see
this post on how to correctly upload images to the forum thanks.
Many thanks for the reply my apologies for incorrect image uploading.