ICD ST Hard Drive Adapter BD reversed
Posted: 11 Sep 2022 14:10
Hi,
I proudly present my last finished project of remake an old ICD ST HARD DRIVE ADAPTER BD.
I restored firmware from two protected GAL16V8 chips, drew full diagram and made completely new PCB from recreated schematic.
All of this was possible thanks to MARKUS608 from atari-home.de forum who DONATE his device to do reverse-engineering tricks on them and thanks to well known CZIETZ from atari-forum.com for great help in searching for old Atari devices.
All is working 100% like original. So - anyone can make a clone using data localized on my www there -> http://atari.myftp.org/icdadabd/icdadabd.html
Please use GOOGLE TRANSLATOR to read article(s) because site is written only in Polish language.I invite you to visit http://atari.myftp.org/. If you have old ICD intefaces (AdSCSI, AdSCSI Plus) please contact me by PM. Thank you.
Regards
tOri
I proudly present my last finished project of remake an old ICD ST HARD DRIVE ADAPTER BD.
I restored firmware from two protected GAL16V8 chips, drew full diagram and made completely new PCB from recreated schematic.
All of this was possible thanks to MARKUS608 from atari-home.de forum who DONATE his device to do reverse-engineering tricks on them and thanks to well known CZIETZ from atari-forum.com for great help in searching for old Atari devices.
All is working 100% like original. So - anyone can make a clone using data localized on my www there -> http://atari.myftp.org/icdadabd/icdadabd.html
Please use GOOGLE TRANSLATOR to read article(s) because site is written only in Polish language.I invite you to visit http://atari.myftp.org/. If you have old ICD intefaces (AdSCSI, AdSCSI Plus) please contact me by PM. Thank you.
Regards
tOri